Cardboard Insulation Baffles

Baffles not only allow for airflow, but they also keep roof insulation off your roof deck. This is especially important in the winter months of Michigan. Condensation can form on roofs that are in contact with attic insulation during winter months. Climate and the home's pitch or slope are also factors in the likelihood of condensation. To prevent potential condensation on roof decks, install baffles in each cavity.

Other baffles have a single purpose, which is to provide insulation. They don't consider the possibility of it falling out. To maximize the insulation's potential, this type fills every gap and reduces stale air. Installing insulation without baffles could result in areas that are either too big or too small, which means that there isn’t enough insulation. Baffles are a great way to make sure that all rafter spaces have been filled. They also prevent insulation from filling any unneeded areas in your crawlspace or attic.

The roof's edge is covered by ridge exhaust vents. They aren't visible enough so they don't detract from the roofline. The unique covers protect static vents from hail, snow, and rain to make sure they work well. Many of these static vents come with enclosed fans. Powered exhaust fans can be powered by solar- or electrical-powered fans that are activated when the attic temperature is below a certain limit.

Do your heating or cooling bills seem too high? Your crawlspace or attic may not have enough insulation. This problem could allow the conditioned atmosphere to escape into your surrounding area. This will increase your energy consumption, and can result in an expensive and uncomfortable summer.

Michigan residential construction code requires a baffle be installed in every cavity; however, at Ecotelligent Homes we don’t treat the code as the gold standard, we treat it as the bare minimum allowed. Our basic attic insulation package goes beyond the minimum code requirements and includes installing baffles in every cavity with a blocker and air sealing of the exterior top plate, see sketch below (artwork courtesy of our crafty engineer, Owner Amanda Godward).

Baffles can be used to stop the flow of gas, fluid, or air. They are often used in conjunction attic vents. Attic Air claims that baffles allow for proper airflow and prevent insulation from clogging vents. They can be made from rigid waterproof foam, plastic, or cardboard and are available in different lengths. They are installed between the rafters of your attic ceiling.

The proper circulation of air in your attic space is possible by using rafter baffles. They act as a barrier between insulation and roof sheathing, and keep heat and moisture out. Between the soffit and ridge vents, the baffles need to be placed. Over the baffles, batting insulation should be applied. Rafter baffles made from rigid foamboard are made. They can be installed easily on your attic's rafters. You will need to remove the fascia board and soffit vent screen before you can install them. Next, place the insulation baffle onto the insulation batts. Attach them using staples. Before you attach the baffles to your insulation batts, be sure to inspect them for any obstructions.

Ventilation in roof systems with an attic is critical. This allows for airflow to pass through the attic and out of the roof vents. These vents control hot air and moisture. Baffles should be placed between the roof's structure and the trusses to stop insulation from clogging up the attic space. To maintain airflow in the attic, baffles must be installed at the intake vents (soffit vents) of the roof. The details of installation are what can make or break a project. Installing baffles correctly can be made easier by following the installation instructions.

Do you have insulation that is blocking airflow? Are you experiencing poor air circulation and need to improve channel airflow or reduce air leaks? Are you looking to vent cool and fresh air upwards onto your roof deck. Surprisingly, even the most well-insulated attic space could still need the help of attic baffles for additional air circulation.

Remove any old insulation from your attic edges before installing insulation. After that, place a baffle at each bay between the roof rafters. Be sure to place each baffle in the correct position. Also, ensure the bottoms of the baffles are parallel to the ceiling beams. After the baffles are secured, spray foam is used to seal and fill in any gaps. This will stop air from leaking. Insulation baffles help keep the crawlspace and attic heated. They resist moisture and deterioration, even in harsh environments. They can be used to reduce energy bills and improve air quality in your home.

Another place you can install insulation baffles is in your attic vents. These will help to keep your attic vents clean and free from debris which could lead to mold or mildew. Insulation baffles may be made from rigid waterproof foam or cardboard, PVC, plastic, or both. They can be placed between the rafters and on the attic floors.

For proper air circulation in your attic space, rafter baffles will be essential. They help to keep moisture and heat out by creating a channel between insulation and roof sheathing. Install the baffles between the soffit vents and the ridge vent. The baffles should be covered with batting insulation. Rafter baffles can be made from rigid foam board. These baffles can be easily mounted on attic rafters. First, remove all fascia boards and soffit vent screens. Slide the insulation baffle on top of the insulation batts, and attach them with staples. Before installing the baffles, make sure you inspect them for obstructions.