Cad (Computer Aided Design)

Steel Beam Coping Machine

The Voortman CNC Beam Coper can be used by fabricators or general job shops to cut and notch different types of steel profiles. The following questions can help you decide if this machine is the right one for your needs.

The CNC Beam Coping Machine (also known as the Beam Coping Machine) is the most cost-effective beam coper on the market. It is the result of strong and productive cooperation with Voortman - the top manufacturer of structural steel fabricating machines.

Owning our Robotic Coping and Profiling system is equivalent to an optimized fabrication process that has been automated specifically to bring ease to fabricators and metalwork manufacturers as it can easily work the processes of angle lines, beam drill lines, hydraulic punches, ironworkers, band saws and coping machines respectively. This is simply a way to take your fabrication processes from zero to a hundred!

The APC 1200 is an upgraded version of the APC 1200. The combination plasma and oxy fuel cutting features are available with both torches mounted on pivoting heads. The computers will control the flipping of one to the other in less than a second, so you don't have to do any manual work. To maximize efficiency, the machine is operated primarily using the Plasma. The machine is preprogrammed so that it automatically switches to the Oxy Fuel if the material thickness exceeds the Plasma's cutting capabilities. The upgraded unit includes laser probing to adjust the height automatically.

Plasma Coping

Plasma Coping

Voortman's software has CAD to create custom designs, CAM to nest, and CNC to automate operations. The software is compatible to almost all designs and profiles, and doesn't require an annual service agreement.

The triple torch CNC beam cutting machines have multiple torch and three torch torches. Each torch has a dedicated web or flange. Although the positioning time is shorter with the triple torch machine then with the single torch, the single torch is able to do much more cuts than the existing triple torch models due to the flexibility of the 5-axis movement for the cutting head. The average cost of a triple torch machine is 3-4x that of our single torch CNC beam, coping machine.

Why do engineers use I beams

".. over the past two and a quarter years, we have seen a dramatic improvement in the efficiency and quality the preparation of our product. It was difficult to cope with and prepare for welds in the past. Manually laying out and burning leaves much to be desired. The Liberator is much more efficient and leaves you with a cleaner burn. The Liberator delivers big results in a small machine. Ocean has given us the opportunity to save energy and time, which in turn means that we can offer our customers a better product and a lower price.

The basic unit consists of a semi-automatic, oxygen-fuel coping device. Operator positions the workpiece, adjusts the torch height, and fine tunes it. There is also an automated option that allows the laser to probe the area and set its torch height automatically. The basic unit is equipped with powered conveyors. This allows the operator to measure and mark the feedstock's X length before it can be cut. An optional automated measuring system can be added via Laser measurement of the feed stock. The operator can input the type of material to be cut using the interface. The computer touch screen displays a list of choices that the operator can scroll through. The computer has all dimensions for the AISC structural metal. It is possible to program the computer with a fully dimensioned handle drawing. This simplifies the process and reduces errors. The operator can customize and override any input and save it as a new programme, if necessary. The machine can be programmed remotely using DSTV exported drawing. Operators can control the equipment using a wireless remote. This allows the operator to view from any angle necessary to inspect operations and keep accuracy. The operator places his mark on the material, moves it into place, clamps hydraulically the material to be cut, and then checks for accuracy. The laser is aligned by the operator, and the cycle starts. The torch lights, preheating the material. The operator initiates the cutting process by hand and completes the job as long as the torch height remains constant.

Why do engineers use I beams

Beam Coping Machine Tour

Voortman and Gulf States Saw & Machine Co. are committed to providing affordable, reliable CNC solutions that work for you. The Voortman has been built to the highest safety standards with state-of-the-art components.

The Voortman uses a specially designed torch nozzle that will typically last about 3 – 6 months depending on how hot you run the machine. Because of the break-away head that deflects the torch nozzle, the torch nozzle is almost impossible to bend.However, the nozzles eventually get worn out due to the heat of the gases passing through the nozzle. Replacement torch tips are around $75 per tip.

Beam Coping Machine Mechanism

The main reason is cost. A plasma-cutting process can produce a high level of carcinogenic dust. This dust must be captured in an extraction filtering system. This and the cost to completely cover the machine to evacuate it raise the price significantly beyond what an average fabricator is willing to pay to get a beam coping solution.

Voortman provides technical support 24 hours a day to all of its global clients. Voortman’s inside service staff have many years’ experience in the field or assembly. They also have hands-on knowledge with most machines. Voortman's service personnel are always available to help you with any question that might arise.

Why do engineers use I beams

Check our other pages :

What Is T Beam And L Beam

Voortman's Roller Feed Measurement System exceeds industry standards for roller measurement technology. It is essential to ensure that accurate measurements are taken without any delay in production. Even if there are slight variations in the material, accuracy is maintained.

The CNC Beam Coping Machine has the lowest price beam coper in the universe and was developed through a productive partnership with Voortman. Voortman is the largest manufacturer of structural steel fabrication machinery.

Steel Beam Coping Machine

Frequently Asked Questions

The H beam's cross section is more robust than that of the I beam. This means it can support a heavier load. The cross section of the H beam, on the other hand, can only bear direct load and tensile. However, it cannot resist twisting due to its narrow cross section. It can only bear force in one direction.

Preheat the I-beam using the torch flame. To start cutting, grab the torch trigger and hold it. Holding the torch trigger, point it at the outer edge to cut along the line. You can stop if necessary and then continue where you left off.

A beam made from a stiffer, stronger material will produce a beam that's stronger and more rigid. The material property that is measured in terms of stiffness is known as "Youngs Modulus Elasticity".

When you are assembling a coping-saw, ensure that the teeth point towards the handle. The teeth will cut if you pull the saw rather than pushing it. This will improve accuracy and prevent your saw from breaking. It will also keep your wood from chipping.

The correct answer is "B." 0.2 mm.