Angle Iron

Cnc Beam Drill Line Instructions

It is no good having a CNC drilling machine if it doesn’t enable a fabricator compete at the top of the steel fabrication field. Advantage-2 allows you to process technical programmes with speed and intelligence. Each drilling axis includes three five-station tool changers. Each can drill, countersink and tap as well. Signomat underside scribers or part stamping units are also possible to be fitted to this drill-line. Part information is kept even after blasting, painting and galvanizing. Minimizing shop errors? Check. Advantage-2 drills more aggressively and produces more holes than any other line of drilling. High torque drilling axes have thicker, more aggressive cuts that extract more chips with each turn. This drill line can eat through beams as well channel, angle and tube. Advantage-2 is able to process any profile up to 44 inches wide x 18 inches tall.

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Cnc Beam Drill Line Instructions

The Morse Taper adaptor lets you use standard parallel shank drill bit sizes when drilling smaller diameters. The maximum drill diameter is?" It allows a maximum drill diameter of 12mm and a minimum drilling diameter of 3/64's (1mm).

We have installed more than a thousand CNC Beam Drill Line and angle lines throughout the world and we have found that the average operator, who has never before programmed a machine before, can become efficient on the machine in less than 1/2 day.

Cnc Beam Drill Line Video

Cnc Beam Drill Line Video

Voortman machinery is the worldwide leader in structural steel fabrication technology. Voortman machines provide steel fabricators with an advantage in the steel sector and allow them to maximize tonnage. Advantage-2 CNC beam drill is the core of any structural-steel fabrication shop. This machine is the heart of it all. It can drill endless carbide holes at high speeds, with multiple spindles, and at high speed. Advantage-2 is the most productive drill line in the steel sector. This drill line supports shops over the long term thanks to its heavy steel frame. The Advantage-2 is able to run profiles from one end to the other without any stops in production thanks to its roller feed design for the outfeed and infeed. Many fabricators around the globe use their Advantage-2s every year to make hundreds of thousands of tons steel.

The Advantage-2 is powered via 25 HP (18.5kW), Siemens spindlemotors. It features 3 drill spindles that are equipped with 5-station tool changing stations. This powerful drilling technology ensures optimal operating time as well as drill hole quality.

Cnc Beam Drill Line Load

"..In an attempt to meet customer requirements and increase output, we have built a new beam drill system. The lower labor cost and quicker turnaround times have resulted in us landing high-quality jobs.

These drop in serrated grippers can be used to secure base plates and flat bar profiles, as well as angle and other profiles that may have rounded edges which want to push away at the datum line.

Cnc Beam Drill Line Load

Cnc Beam Drill Line Clamp

The CNC Beam Drill Line can import DXF files and can use them to process 3-D shapes as long as the steel is detailed according to specific rules. Some of these rules might be different to the way you are detailing at the moment and might require some adjustment. This process is not nearly as seamless as the 3-D modeling software solutions above.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Z Size Drill Bit

We have successfully installed over 1000 CNC Beam Drill Lines and Angle Lines all around the world. It has been our experience that an average operator who has never programmed a machine before can get up to 50% efficiency on it in less than half a day.

CNC Beam Drill Line beam processing solutions are extremely efficient. It requires only 70ft x nineft of floor space, making it suitable for small fabricators or those with limited space. There are also many CNC Beam Drill Lines that can be installed outside, which frees up more space for the fabricator.

Cnc Beam Drill Line Load

Check our other pages :

Voortman Steel Machinery

These drop-in serrated graspers are ideal for securing base plates, flat bars, angle, and any other profile that may have rounded edges that push away from the datum.

Beam drills are crucial tools in medium-sized and large-sized structural fabricating shops. Beam drilling machines drill holes accurately in a variety steel profiles at different lengths. These machines are able to automatically draw the lines and create the hole manually using a punch, mag drill, or plasma. This time-consuming process can take weeks, and many people are needed to complete the task. A beam drillline eliminates manual layouts and the associated errors.

Frequently Asked Questions

The span and loading conditions will determine the beam's overall depth. For simple supported beams, it can be taken to be between 1/12 and 1/15 of their span.

Round tubes are the strongest by weight. It is more resistant to bending and twisting than rectangular or square tubing with the same chemical composition and dimensions.

There are several types of beam structures Continuous beams. Continuous beams are those that have two or more supports to reinforce the beam. ... Simply supported beams Simply supported beams have support at one end and both ends. ... Fixed beams ... Overhanging beams. ... Cantilever beam.

C-Channel is usually stronger than tube in the vertical direction (as shown in the beam profile chart picture above).

The beam drill line is important in large-sized structural fabrication shops. These machines are used to drill precise holes in beams, angles, or sections of bar stock. They can be quick and efficient at laying large structural members.