Cnc Beam Drill Line Spacing

Cnc Beam Drill Line Installation Instructions

Voortman offers 24 hour technical support for our global clients. Voortman's service personnel have many years of experience working in the field, assembly or factory checkout. This allows them to be familiar with all types of machines. Voortman has a service team that is available 24/7 to answer your questions.

Voortman's CNC Beam Drill Lines can be included in a Drill Saw Line, or in larger fully-automated integrated production lines. This is also known as Multi System Integration. Learn more!

The CNC Beam Drill Line is built exclusively for GSS Machinery by Voortman. Voortman handles the installation, warranty and service work on the CNC Beam Drill Line. And while Voortman is the service provider, GSS Machinery is always there to get involved should the need arise.

The CNC Beam Drill Line is programmed either manually on the machine or by using the Peddimat program. This software is included in the AVENGER. It can be installed on any number of computers in your office that you like. It is the exact same software as the machine, and it is also used on all Voortman CNC fabrication machinery.

Roller Feed Measurement

Roller Feed Measurement

"..We have drilled approximately 25,000 hole since we purchased our CNC Beam Drill Line just four months ago. It used take us about 5 minutes each to drill and lay out each hole. It now takes us around. 30 seconds per hole... an 1875 man hour savings in four months. That is $84,375 at our shop. As you can see, this machine will be fully paid off in less then one year. It is not only faster than our production, but it also allows us to free up floor space for other jobs.

CNC Beam Drill Line was designed for fabricators and general job shop personnel who need to drill holes in all kinds of steel profiles. These questions will help you determine if the machine is right for you.

Cnc Beam Drill Line Model

The CNC Beam Drill Line is the most affordable CNC beam drill line on the market today and ensures that the fabricators is the low-cost producer, allowing him to win more work and to make more margin.

The Advantage-2 is powered via 25 HP (18.5kW), Siemens spindlemotors. It features 3 drill spindles that are equipped with 5-station tool changing stations. This powerful drilling technology ensures optimal operating time as well as drill hole quality.

Cnc Beam Drill Line Model

Can We Drill On Beam

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

GSS Machinery staff and personnel have been a tremendous support to me. Without them, I believe we wouldn't be in the position we find ourselves in in the steel fabricating markets.

Cnc Beam Drill Line Installation Instructions
Labor Costs

Voortman is the only manufacturer of the CNC Beam Drill Line for GSS Machinery. Voortman takes care of all aspects of the CNC Beam Drill Line's installation, warranty, maintenance and repair. Voortman provides the service, but GSS Machinery can always be reached if required.

GSS Machinery offers a variety of drilling options to drill with your CNC Beam Drill Line.

Cnc Beam Drill Line Model

Check our other pages :

Software

Yes. Outside, we have many CNC Beam Drill Lines. It is important to provide weather protection for both the control panel, and the moving mobile platform. To view photos from many of the outside installations we have, please feel free to contact our office.

Renishaw 5Axis Calibration – The calibration unit used is a Renishaw model APCA45 and a modified spherical pen. It has a retractable cover that can be removed and an air purge that will remove any dust or debris from the device during activation. It is mounted to a swingarm controlled by a pneumaticrotary. The device swings into calibration for calibration only.

Frequently Asked Questions

T Beam's disadvantages: Because the beam slab is monolithic (rigid), its resistance to lateral shear forces becomes very weak. (cracks develops quickly). This is why T beams are used for high-rise buildings in earthquake-prone areas.

Divide the beam's span in inches by 20 to calculate its required depth. A 25' span would equal 25x12 / 20, which is 15 inches. This beam's width would vary between 1/3 to 1/2 its depth.

Consider the same-weight sections and same material beams. This means that all cross sections are equal for axial load purposes.

For Fe415, the minimum steel percentage is 0.205% of the beam's effective area.

There are some guidelines and rules. According to IS 456:2000, the minimum thickness of RCC beams should not be less that 9'' (230mm). Therefore, RCC beams must be at least 9'' (230mm thick). Concrete grade M20 with T12 as tension bar at bottom and T10 at the top is recommended.