Cnc Drill Line Dead

Cnc Drill Line Chuck

Voortman proudly offers technical support 24 hours a day to its global clients. Voortman’s inside service staff have years-long experience in the field or assembly. They also have hands-on knowledge with many machines. Voortman's service personnel are always available to help you with any question that might arise.

Each of our beam drill line machines have linear guides, central lubrication, and a tool cooling system to ensure smooth operation and lower maintenance. Within each coordinate system there is a 4 station tool changer, allowing it to drill, mill, scribe, counter sink, or tap as needed; tools can even be swapped out mid-operation easily and without disruption. Positive beam positioning consists of an arm attached to a rack and pinion system on the feed conveyor to more accurately position the beam as it goes through the drill line, maintaining .004”, making our steel beam drill lines much more accurate than friction roller machines.

The CNC machinery you choose to purchase can be a Vertical Machining Machine or a CNC routing machine. These two pieces can be used to accomplish many different things. Which one should you...

Voortman is known for its dedication to service and support. It is the industry's gold standard. Voortman provides a global team for customer support that is available 24/7 at the Voortman Customer Support Center. Voortman supports you with state-of-the art remote diagnostic software, local field support and an industry-leading warranty.

Line

Line

Z-Reader Probe-- The Z-Reader Probe can be used to locate the surface. It can be used to programmatically or manually. This option is not activated while cutting and is easily retracted. It can be used to verify the surface of each pierce, or to map the entire surface before cutting begins. It starts by initializing or zeroing the device to a surface at the start of a program. After that, it accumulates or tracks any difference.

Programming the CNC Drill Line for new operators is simple and intuitive, even for those who don't have any computer or CNC experience.

Cnc Drill Line Chuck

Cnc Drill Line Dirt

"..We have drilled approximately 25.000 holes since we purchased our CNC Drill Line four months ago. It used to take us 5 minutes to drill each hole. It now takes us approximately. It takes us 30 seconds per hole... that's a savings of 1875 hours over 4 months. This is equivalent to $84,375 in our shop. This machine will pay off in less than a year, as you can see. It not only speeds up production but also frees up space for more jobs.

We have installed over a thousand CNC Drill Lines and Angle Lines around the globe and have found that even a novice programmer can be proficient on the machine in less time than half an hour.

Cnc Drill Line Dirt

Motor

".. Although the machine is targeted at structural fabricators, I found it to be very useful for drilling truck frames. This machine is very accurate and repeatable, which has made it easy to put together a truck frame. Avenger drills a series of channels for one truck within two hours. It takes 16 hours to do the same thing manually. This machine has dramatically increased our productivity, profitability, and efficiency !.."

Voortman has developed Raptor 3DCAD/CAM Software. This software takes CNC innovation one step further. Users can program faster and more accurately with Raptor 3DCAD/CAM Software. You can inspect, modify and export your part information from within the 3D platform. This combination with Voortman CNC technology ensures maximum capacity for fabricators.

V Cnc Machining

Peddimat is incredibly simple and intuitive, and takes less than an hour to learn, even if you have never worked on a computer in your life.

Our beam drill line machines feature central lubrication and linear guides. This ensures smooth operation and less maintenance. Each coordinate system has a 4-station tool changer that allows it to drill, mill and scribe as well as counter sink or tap. It can also swap tools mid-operation without any disruption. The positive beam positioning system consists of an arm attached on the feed conveyor to a rack-and-pinion system. This allows the beam to be positioned more precisely as it passes through the drill line.

Cnc Drill Line Dirt

Check our other pages :

Cnc Drill

Voortman CNC Beam Drill Lines are often part of a Drill Saw Line combination or larger fully integrated production lines. These are also known as Multi System Integration. Read more below!

The CNC Drill Line is very simple to operate and most of our Avenger operators were the men doing layout on the floor. No prior computer knowledge is necessary, and full training is provided at the time of the installation

Frequently Asked Questions

C-channel frames are stronger against rust.

Flange of T-beam/L-beam refers to the portion of the slab that acts in tandem with the beam to resist loads. The beam below the flange can be called Web or Rib. The T-beams support the slab, while the L-beams support it.

Channel would cost less than a similar thickness of square tubing but would last longer because it is channel x2. You could easily make a bolt-together rack with channel by welding flat steel caps (IE top of the uprights).

C or Channel Beams. Channel beams are typically used to support lighter loads. They are a popular choice for residential construction and not for heavy construction.

The shorter beam will therefore be stronger when carrying the same load. To compare beam strengths, it is necessary to take into account more than the section modulus.