Double Acting Hydraulic Punches Exercise

Double Acting Hydraulic Punches 20 Quart

Our Porta-Punch is the quickest and easiest way to punch up to 13/16" Round Holes in 3/8" thick mild steel with a MAXIMUM tensile strength of 65,000 psi.

Aside from their compact design, hydraulic punches offer great versatility coupled with a stunning throat depth, and they can impeccably adapt to various punch and die designs.

It allows for a simple operation connection.

This portable hydraulic punch presses from Cleveland Steel Tool, weighing in at just 31 lbs, punches in less than a second and is 35 tons. Easy linear operation is assured by the dual-action. These punches are unlike similar tools. They can punch and strip within a 90-degree arc movement of your lever. The upper, rotary-style punch has enough power to punch 1/2 inches through 1/2 inch plate of mild steel. The throat of this punch permits punching...

Double Acting Hydraulic Punches Operation

GSS Mchinery offers a range of double-acting hydraulic punches that can be used to quickly produce holes in various materials, such as angle, channel, beam flanges, bars stock, plates, and channels.

It can punch any shape of holes, such as square, round or rectangular, H type e.t.c, in a square rectangular tube flat, flat, or angle.

Double Acting Hydraulic Punches Operation
Double Acting Hydraulic Punches 24 Volt

Double Acting Hydraulic Punches 24 Volt

Quick mold changes, easy to use tools that are quick and easy to adjust. This significantly reduces the time it takes for modifications.

Portable double acting hydraulic punches are ideal for punching smooth and accurate holes in a short period, making them remarkably faster and better than drilling. It features an automatic punch, returns, and reset operations, making it ideal for various materials such as angle steel, channel steel, H-shapes, and flat sheet(copper plate, aluminum, iron, and steel plate).

Double Acting Hydraulic Punches Vs Single

This 35-ton portable hydraulic punch press from Cleveland Steel Tool weighs just 31 pounds, is easy to use, and punches in seconds. The dual-action ssures easy linear operation. Unlike other similar tools, these punches will punch and strip inside a 90 degree arc movement of the lever. The upper rotary-style punch generates enough power to punch a 1/2 inch hole through 1/2 inch mild steel plate. The throat of the punch allows for punching…

This hydraulic punches are used extensively in many industries such as electric tower cross-arms, utility pole crossed arm, elevator brackets, air conditioning brackets, zinc steel and guardrails.

Double Acting Hydraulic Punches Long Stroke
Double Acting Hydraulic Punches Long Stroke

Its punch, return and reset operations are entirely automatic. It comes with a smooth handle at the top, which is easy, convenient to hold, and gable by operators.

You can adjust the tools quickly and it saves you a lot of time.

Double Acting Hydraulic Punches Old Lady

Hydraulic punches that can be used in portable double-acting configurations are able to process a variety of shapes, including oblong and regular punches.

Here are some maintenance tips. Always clean the punch & die. Even though they don't need to be lubricated, cleaning can help prolong their lifespan. In both punches, and pumps, only use Enerpac Oil. Match your punch and die carefully at all times. Operationally, make sure to use dies that have bigger openings. Always change out worn-out or chipped punches and/or dies promptly. For materials processing, it is important to always observe the appropriate lifting force in order to avoid cracks.

Frequently Asked Questions

Remove a piece of aluminum foil. To sharpen the blades of a three-hole punch, make sure the foil is long enough to cover all three holes. Pull off enough to sharpen all of the punches at once for one-hole and decorative punches.

A punch press has two cooperating components: the punch, which is attached to the machine's reciprocating ram, and the die, which is clamped onto a bed or anvil with a flat surface perpendicular to the ram's path. When in use, the punch pushes against the workpiece held in the die.

Punches are divided into two categories: hollow and solid. Hollow punches are used to create a hole by puncturing a surface such as sheet metal or leather. The "exit hole" near the working end of a hollow punch makes it easy to identify.