If you're a beginner or hobbyist, you're probably looking for something cheap and lower powered than the laser cutters we've mentioned so far. In which case, let us point you to the AtomStack Portable Mini Laser Engraver. While it's nice and portable, its 5W laser power can cut cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF and leather, and engrave materials like wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal and stainless steel.
The CNC system controls cutting speed, laser power and gas pressure. The movement trajectory during slitting is also controlled by the CNC system.
The motor ring should be cleaned frequently to ensure the normal operation of the machine and accurate cutting, so as to ensure the cutting quality;
1000W/2000W/3000W fiber laser cutter is used for cutting metal signs, metal signage, metal letters, metal kitchenware, metal arts, sheet metal fabrication, metal components, metal parts, and other metal fabrication. Now the best metal laser cutter for sale at cost price.
Adjust the position for the cutting head. After all preparations have been made, you are able to start cutting.
The maintenance-free, industrial-grade laser cutting system offers outstanding technical benefits, low power consumption, lower operating costs, repeatable and precise laser positioning performance. This sets new standards for complex pattern cutting and improves process quality inspection.
Before starting the machine every day, carefully check the pressure of the working gas and cutting gas. If the gas pressure is not enough, it should be replaced in time. Check whether the zero points of X axis, Y axis, and Z-axis, laser ready state and other buttons are damaged. Check whether the zero point, limit switch, and travel block mounting screws of the X axis, Y axis, and Z axis are loose, and whether the limit switches of each axis are sensitive. Check whether the circulating water level in the chiller is sufficient. If it is insufficient, it must be replenished in time. Check whether there is leakage of the circulating water in the external optical path, and the leakage must be dealt with in time, otherwise the life of the optical lens will be affected. The cutting waste should be cleaned up in time, the workplace should be cleaned up, and the workplace should be kept clean and tidy. At the same time, do a good job of cleaning the equipment to ensure that all parts of the equipment are clean and free of stains, and no debris can be placed in each part of the equipment.After the daily work is completed, open the drain valve of the air storage tank at the bottom of the air compressor to drain water, and close the drain valve after the waste water is discharged. After the daily work is completed, shut down according to the shutdown steps, and then turn off the main power of the entire machine.
Laser cutting machine is an automated laser system with a CNC controller. It uses CO2 and FIBER laser beams, to cut metals (steel or copper, brass, aluminum. alloy, iron, etc.), rubber, wood, paper, foam, textiles, and fabric into 2D/3D shapes.
A laser cutter will bring your designs to life. GSS Machinery Laser System allows you to make miniature models or prototypes that are extremely detailed. Laser cutting machines are the best precision tools to cut plywood, balsa wood, foam board and cardboard.
Due to the thin incision of the fiber laser, the gas consumption is large (especially when cutting with nitrogen).
The best laser cutters were once something only big business and heavy industry used. But these days, they're getting cheaper, and are now being used by everyone from makers, creators and agencies to DIYers and hobbyists.
The focus tracking system is composed an auto focus laser system and a tracking sensor. The cutting head includes mechanical adjustment parts, light guide, water cooling, and air blowing systems. The sensor is made up of the amplification control and the sensing elements. There are two types. One is an inductive tracking system (also called a contact tracking method), and one is a capacitive tracking system (also called the non-contact tracking method).
You should choose suitable lenses and nozzles, and then inspect them to verify their cleanliness.
Elsewhere, the pre-installed exhaust fan keeps everything cool, with low noise. And there are four detachable wheels you can use to move this laser cutter around easily. On the downside, while this machine does come with software, it's not really worth bothering with, so we'd recommend downloading K40 Whisperer and Inkscape instead.
Laser cutting is classified into three types: fusion cutting, flame cutting, and remote cutting. An inert gas (typically nitrogen) is used in fusion cutting to expel molten material from the kerf. Nitrogen gas does not exothermically react with molten material and thus contributes no energy to the system.
Laser Cutting Process Drawbacks
When compared to other techniques, laser cutting requires a high power consumption.
The laser beam is extremely delicate to handle.
If the laser beam comes into contact with human workers, it is hazardous.
Laser cutting is still unable to cut thick metals.
Laser cutters can cut all types of metals, including mild steel, stainless steel, and nonferrous metals.