A cooling system refers a water chiller which cools the machine. The electro-optical convert rate is 33%. 67% of the electrical energy is converted into heat. To maintain normal operation of the equipment the chiller must cool down with water. This will reduce the temperature of all parts of the machine.
It is strictly forbidden to turn on the chiller when there is no water or the water level is too low to avoid damage to the water cooling equipment. It is strictly forbidden to squeeze or step on the water inlet and outlet pipes of the chiller to keep the water passages unblocked. The laser beam will cause burns when it irradiates the human skin. Staring into a laser beam for extended periods of time can cause serious damage to the retina of the eye. Operators must wear goggles. The equipment will generate a lot of smoke and dust when cutting certain plates, so the outlet pipe of the fan should be led to the outside, or an air purification device should be installed. In addition, operators should wear dust masks to prevent the occurrence of occupational diseases. When the temperature is below 0 °C for a long time, the cooling water in the water cooler, laser and water pipeline should be drained to prevent the cooling water from freezing when the temperature is too low, causing damage to equipment and pipelines. Check the protective lens inside the cutting head once a day. When the collimating mirror or focusing mirror needs to be disassembled, record the disassembly process. Pay special attention to the installation direction of the lens and do not install it wrong. Turn off the air source and power supply when off work, and the residual air belt in the machine pipeline should be emptied at the same time. If you leave the machine for a long time, please turn off the power to prevent unprofessional operation. Pay attention to observe whether there is lubricating oil on the surface of the horizontal and longitudinal guide rails and the frame of the machine, and maintain good lubrication. If there is an automatic height adjustment device, check whether it is sensitive and whether to replace the probe.
With fusion cutting, the material is heated by the laser beam up to the melting point and forced out of the kerf by a high-pressure stream of cutting gas (up to 25 bar). As with sublimation cutting, an inert gas, usually nitrogen, is used to force the molten material out of the cut.
STJ1390M hobby hybrid CO2 laser cutting machine with 280W Yongli combined beam laser tube, which can cut up to 3mm stainless steel, 4mm carbon steel, 30mm acrylic, 25mm wood. Now the best budget hobby laser cutter for sale at low price.
A CNC controller controls the movement of the X, Z, and Y axes and sets cutting parameters like power and speed.
The overhead IRIS camera system on the Fusion Pro allows for precise and easy positioning of graphics. For quick job turnaround, drag and drop your artwork onto your materials.
Fiber laser cutting systems can be used to cut various metal materials (sheet steels. metal tube. metal profile. 3D curved metals. and irregular metals). They are capable of cutting carbon steel, mild, stainless steel. spring steel. galvanized. aluminum, copper. gold. silver. alloy. titanium. iron. brass. manganese. chromium. nickel. cobalt. lead.
Laser cutter is an automated laser tool that includes CNC controller and machine frame. It also includes power supply, laser tube and laser head.
Fiber laser cutting systems are able to cut variety of metal materials (sheet metals, metal tube, metal profile, 3D curved metals and irregular metals) of carbon steel, stainless steel, mild steel, tool steel, spring steel, galvanized steel, aluminum, copper, gold, silver, alloy, titanium, iron, brass, manganese, chromium, nickel, cobalt, lead, and more metals.
This cutting head transforms the laser beam into something that cuts through the substrate material or engraves on it. Before reaching the substrate, the laser beam passes through a nozzle along with compressed gases like nitrogen or oxygen.
Based on the table size, laser cutting systems are classified as handheld, portable, small, desktop, benchtop and tabletop. Take measurements of your workshop to make sure it fits, then buy the right table.
The slit has no mechanical stress, no shear burr. It is high precision, good repeatability, does not damage the surface of the material with smooth cut edge.
Need to work with metal? The Triumph Fiber Laser Cutting Machine is made for it, making it the ideal choice for engraving. You can cut aluminium, stainless steel, copper, gold and silver without shadowing thanks to a high-speed galvanometer.
The laser's interlocked metal enclosure carries with it a class 2 safety rating, which allows for safe use in any workshop, home, or office.
Cutting thick materials is difficult.
The less effective laser cutting becomes as the material thickness increases. For example, when it comes to cutting thick sheets of carbon steel, laser cutting may be difficult.
Laser power of 80W. A laser can typically cut up to 10mm acrylic and up to 9mm soft woods.
Laser Cutting Process Drawbacks
When compared to other techniques, laser cutting requires a high power consumption.
The laser beam is extremely delicate to handle.
If the laser beam comes into contact with human workers, it is hazardous.
Laser cutting is still unable to cut thick metals.