Single Acting Hydraulic Punches Jet

Single Acting Hydraulic Punches Cylinder

The machine has a dual-action design that reduces cycle time. It also allows for minimal material handling which results in highly efficient holes when compared to other processes.

Simply adjust the mold to process a variety of holes of different shapes and specifications.

Hydraulic Bench Presses will accelerate fabrication and reduce arm fatigue. It features a tough 3/8 inch plate structure and can be used in a variety different ways. These dies can also be used in an H frame press, hydraulic punch drive, or even with a 3/4" or 7/16 draw bolt to dimpling PortaFab machine. This is Scotchman’s entry level ironworker. This portable 110 volt unit has 45 tons hydraulic power. It is very handy for aligning punches and dies when punching thin sheetmetal. This punch is great for punching spring metal for mounting race to punch angle iron. The hole can be punched in a distance of 9/16 inch from the web. The rotary punch is powerful enough to punch the hydraulic accessory port on an Edwards ironworker. The punching speed. It comes with a 4.5 second punching pace, jog-down punch for easy alignment, as well as a power-retractable punch. For a US...

The best single-acting, portable hydraulic punch is one that you can trust. We offer a wide range of punches that are compatible with your application. Contact us immediately for any questions or suggestions. We will be happy to help you with your technical problems.

Driver Kit

The 35-Ton hydraulic punching machine weighs 31 pounds and punches quickly. The dual-action remover holds the material and strips it so that you can punch the next hole in just seconds. It is suitable for punching railings, I-beams, tower iron, truck frames and truck frames. The maximum tensile strength is 65,000 Psi. Mount it to your work bench, or bring it to your job site. In less than 24 hours, rectangular, square or hex tools can be ordered.

The Porta-Punch Package contains the 35 Ton C Frame, Electric/Hydraulic pump, 10' or 20f Hose, and four sets stock punches and dies. You can choose from 1/4", 5/16", 3/8", 7/16", 1/2" and 17/32", 9/16", 11/16", 3/4", 25/32", or 13/16" punch sizes.

Driver Kit
Single Acting Pull Hydraulic Cylinder

Single Acting Pull Hydraulic Cylinder

Hydraulic punches that can be used in portable double-acting configurations are able to process a variety of shapes, including oblong and regular punches.

This portable hydraulic punching unit, which weighs in at just 31 pounds, punches in a matter of seconds and is lightweight at only 31 pounds. The dual-action stripper holds and removes material as you punch. It can punch bus bars, tower iron and railings with a maximum tensile force of 65,000 psi. Mount it on your bench or transport it to the jobsite. In 24 hours, rectangular, square and hex tools will be available.

Single Acting Hydraulic Punches Fan

We have spent millions on our own factories and test labs so that our tools will compete with the best professional brands. Because we bypass the middleman, we can pass the savings onto you at a fraction of the cost. It's as simple as that!

Gulf States Saw & Machine Co. makes portable hydraulic punches. These punches can be used to punch and revert, and are fully automated thanks to its built-in dexterous control mechanism.

Harbor Freight
Harbor Freight

Capable of continuously processing an indefinite number of holes and these processed holes are safe from burrs, which makes them unique and beautiful.

The hydraulic pump makes drilling holes simple and compact thanks to its power source, a hydraulic motor. It is capable of producing 49 tons at maximum pressure of 10,000psi and weighs only 63lbs. It includes optional accessories, such as a hose chord assembly, spanners, sub handle assemblies and toolboxes, a 22mm push & die, a 4mm Allen screwdriver, lockout assembly and a spring balancer.

Ch 70

Two-acting hydraulic punches for portable use can process a wide range of unique shapes, regular punches and dies.

Our Porta Punch is the fastest and most efficient way to punch out 13/16" round holes in 3/8” thick mild steel. It has a MAXIMUM Tensile Strength of 65,000 PSI.

Frequently Asked Questions

The combination of ease of hydraulic operation and precision-ground knockouts results in clean, quick holes. Pumps are available with either foot or hand pumps. 3-point punch/die sets that are precision-ground.

Knockout punch definitions. a powerful punch that incapacitates the opponent's ability to continue boxing Synonyms include KO punch, Sunday punch, and haymaker.

Hydraulic punches are used to create round, square, or oblong holes in metal. They are intended for use with mild steel, nonferrous metals, and some plastics (non-shattering). Hydraulic punches can be powered by hand pumps, air/hydraulic, gas, or electric pumps capable of producing up to 10,000 psi (700 bar).