tile stain removal

There are a few different ways to remove floor tiles in Australia, depending on the type of tile and the adhesive that was used. If the tile is ceramic or porcelain, you can usually just score the surface with a utility knife and then pry it up. For tougher tiles, you may need to rent a power tile stripper.

If the tile is set in an adhesive, you will need to remove all of the adhesive before you can safely remove the tile. There are a few ways to do this, but one of the most effective is to use a heat gun or hair dryer to soften the adhesive. Once it's soft, you should be able to scrape it away with a putty knife.

It can be hard to pull up tiles, depending on the type of tile and how it is installed. If the tile is glued down, it can be very difficult to remove. If the tile is nailed or screwed down, it may be easier to remove, but still require some effort. There are a few ways to remove tiles, including using a pry bar or chisel to loosen the tile, using a heat gun to melt the adhesive holding the tile in place, or renting a steam stripper. Whichever method you choose, make sure to wear safety goggles and gloves to protect yourself from sharp edges and hot surfaces.

The cost of having tiles removed will vary depending on the size of the area, the type of tiles, and the removal method. Generally speaking, budgeting somewhere in the range of $2-$5 per square foot should provide a good estimate for the cost of tile removal.

There are a few factors that can affect this price point. For example, if the tiles are glued directly to the substrate (as opposed to being laid on mortar), then it will be more difficult and time-consuming to remove them, which will result in a higher price. Likewise, if there is a lot of adhesive or sealant build-up around the edges of the tiles, that will also need to be addressed and could add to the overall