H Beam Drill

Cnc Beam Drill Line Specs

Voortman's CNC Beam Drill Lines can be included in a Drill Saw Line, or in larger fully-automated integrated production lines. This is also known as Multi System Integration. Learn more!

Voortman is the man behind today's CNC beam drilling line standard. He has used time-tested technology. Advantage-2 processes 150 tonnes of steel per week on average. It is the most efficient way to drill, mill, tap, and countersink.

The CNC Drill Line is built exclusively for GSS Machinery by Voortman. Voortman handles the installation, warranty and service work on the CNC Drill Line. And while Voortman is the service provider, GSS Machinery is always there to get involved should the need arise.

The Advantage-2 is powered by 25 HP (18.5kW) Siemens spindle motors. It has 3 drill spindles each with 5-station tool changers. This drilling technology is extremely efficient and allows for maximum operating time and excellent drill hole quality.

Automatic Tool-changer

Automatic Tool-changer

We believe that for now, based on current pricing from the various suppliers, the customer is better off with good quality Ocean Penetrator twist drill bits and a good quality sharpener.

An attachment that marks 4-axis locations eliminates human error during manual layout. Even after painting blasting or galvanizing, the part information is still retained.

What are the difference between T-beam and I beam

Advantage-2 carbide drill line uses automatic tool changing technology, completely electronic ball screw-feed spindle motion, and fully electronic ball screws feed spindle. These combined with Voortman’s outstanding build quality and design make the Advantage-2 carbide drill line an ideal combination of strength and agility.

The CNC Drill Line is programmed either manually on the machine or by using the Peddimat program. This software is included in the AVENGER. It can be installed on any number of computers in your office that you like. It is the exact same software as the machine, and it is also used on all Voortman CNC fabrication machinery.

Cnc Beam Drill Line Specs
What are the difference between T-beam and I beam

Cnc Beam Drill Line In Word

Voortman machine are the leaders in structural steel fabricating technology. Voortman machines ensure steel fabricators have an advantage in the steel industry. They also optimize tonnage. Advantage-2 CNC beam drilling line is the backbone for any structural steel fabrication shop. This machine is built on a multi-spindle, high-speed, relentless carbide drilling. Advantage-2 is one the most profitable drill lines available in the steel business. This drill line has a heavy steel frame that will provide support for shops for the long-term. The Advantage-2 can run profiles without stopping production because of its roller feed design. An estimated Hundreds of global fabricators run hundreds to thousands of tons of steel through the Advantage-2s each year.

GSS Machinery is committed to offering you the best options for drilling with your CNC Drill Line, or any other CNC Beam Drill Line.

Material

".. This machine is designed for Structural fabricators. But I knew it would work well for drilling trucks frames. The assembly was flawless due to the machine's repeatability and accuracy. Avenger drills one channel for a truck in just two hours. We would have taken 16 hours if it was done manually. The machine has increased our productivity AND profitability !.."

It may be between a Vertical Machining Centre or a CNC Router when deciding on the CNC machinery that you want to buy. These two pieces of equipment can be used for different purposes. Which one should you choose?

What are the difference between T-beam and I beam

Check our other pages :

V Block Drill Guide

Voortman's Roller Feed Measurement System exceeds industry standards for roller measurement technology. It is essential to ensure that accurate measurements are taken without any delay in production. Even if there are slight variations in the material, accuracy is maintained.

The Advantage-2 is powered via 25 HP (18.5kW), Siemens spindlemotors. It features 3 drill spindles that are equipped with 5-station tool changing stations. This powerful drilling technology ensures optimal operating time as well as drill hole quality.

Frequently Asked Questions

Wood Products Historically we have restricted hole sizes in Microllam (r) LVL and Parallam (r) PSL. Members 7.25'' or deeper can use a round hole of 2'' diameter for TimberStrand(r).

The span and loading conditions will determine the beam's overall depth. For simple supported beams, it can be taken to be between 1/12 and 1/15 of their span.

It's also known as a "secondary beam". A secondary beam is one that rests on and transfers its loads to a primary beam, which then transfers them to the columns.

Fixed connections, pinned and roller connections are the most popular types of support in beams and structures that connect to their foundation. You can see any of these supports at any point along the length of a structural component.

These nodes can connect a beam to a column or a wall. A beam that supports multiple beams is called the main beam. Some of its nodes can be non-supporting. These can be, for example, the nodes on which secondary beams rest.