For expanding the engraving area, taller focal length lenses are used that require highly concentrated power.
Plasma can also cut ceramics and glass. Because plasma is electrically conductive, it cannot cut things like wood or plastic.
For advanced designing, you can use other CAD programs (like Photoshop, AutoCAD, CorelDRAW) and import files into EZCAD2.0 in JPG, DXF, PNG, PLT, PCX, DXF, and BMP file formats.
FM-Desktop allows for optional marking areas extensions. You can make it as large as 7.87" x 7.87", or 11.81"x 11.87".
Designed by Mitsubishi engineers and built with Mitsubishi components, the GX-F Series is one of the only laser systems in the industry with a single source for service and support.
Advanced design can be achieved with the help of other CAD programs like Photoshop, AutoCAD and CorelDRAW. Files can also be imported into EZCAD2.0 in JPG and DXF file formats.
The air filter must be removed and cleaned regularly. Serious blockage of the air filter will cause the chiller to malfunction.
The laser module uses an F-theta(?) lens with high energy uniformity, narrow focus spot, and low attenuation.
FSL Mule Pandora must operate in an open configuration for lenses 254mm, 330mm, and 420mm. Only then can laser beams be focused onto the work material.
The beam quality for 20W, 30W, and 50W lasers is less that 1.5 M2, while it is less then 1.8 M2.
Zendesk also hosts their support page. It is divided into sections to help you find what you need quickly.
Using a Raycus 50W fiber laser, you can engrave in stainless steel at a 90° angle with a speed of ~3,540 ipm by utilizing 100% of the laser power.
Raycus is a popular laser source brand. This laser can be used by many different laser cutter, and engraver manufacturer. Raycus will appear in various places on the catalogs and websites of laser manufacturers. It simply means that all these machines have a Raycus Fiber Laser Technologies Co. Ltd. as their laser source.
Boss Laser will pre-assemble your FM-Desktop. They also offer technical support on-site to customers.
Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.
To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.
Laser fiber cutting machine
Fiber optic laser cutters are intended to cut metal at high speeds and with pinpoint accuracy. These machines, which have been on the market for more than 20 years, also use a fiber laser power source.