MCWlaser PRO features a Z-axis that can be manually moved up or down using a control wheel. Unfortunately, the XY axes cannot be adjusted.
Fiber lasers use high-power laser diodes to stimulate active medium and pump optical fiber with laser light.
Carbon steel, stainless steel, silicon steel, alloy steel, spring steel, mild steel, aluminum, galvanized steel, tool steel, aluminized zinc plate, copper, brass, pickling sheet, titanium, silver, gold, iron, alloy, and other metal sheets and tubes.
After you've logged in to RetinaEngrave, v3.0, your first job can be started. All this can be done in less than 30 minutes.
MCWlaser PRO does not offer an upgrade, but you can modify it during purchase.
Fiber lasers can be used to engrave many applications. The wavelength range of fiber lasers is 780nm – 2200nm.
Plasma can, however, cut any type or metal up 80mm thick or 3 inches thick. Plasma can start cutting quicker than laser when cutting thicker material.
A fiber laser can be limited in both the size of the work-bed and the materials that you can cut.
The generated laser beam is then amplified and fed to the cutting head using a flexible optical fiber.
When buying safety glasses for this machine, make sure to buy one which is designed to block 1064 nm laser light.
The light bent in an optical fibre laser is by refraction. An optical fiber cable passes the light via an impurity-free transparent silicon glass core. The core is covered by cladding, which is another layer made of silica with added materials to lower its refractiveindex. Due to the different refractive indexes of the core and cladding, the light will be reflected at the core-clad interface.
If you stare at the fiber laser cutting machine for a long time, it will cause very serious damage to the retina of the eye. All operators must wear laser goggles. Do not operate and observe with eyes exposed. In the cutting path of the laser equipment, it is necessary to avoid the position of any part of the body, so as not to accidentally cause unnecessary injury.
MCWlaserPRO can be used to treat metals like steel, stainless and aluminum, silver, copper, alloy, aluminum, and others.
They can work at very high speeds if they have a galvohead. Galvo heads are used in portable laser engraving machines.
The wavelength is the primary distinction that determines the types of materials that each laser can process. The wavelength of a fiber laser is typically 1,060 nm, whereas CO2 lasers have wavelengths in the 10,600 nm range. Fiber lasers have many advantages over CO2 lasers in general.