The Porta Punch Package includes the 35 Ton C-Frame, Electric/Hydraulic Pum, 10' Hose or 20' Hose, and four sets each of stock Punches and Dies. Select from 1/4", 1/2", 3/8", 7/16", 7/16", 1/2" or 20/32", 9/16", 5/8", 11/2", 3/4", 25/32", and 13/16" sizes for punch sizes.
Well-designed puncher, sturdy upper and lower molds, and can precisely punch holes without shifting. Ideal for “L” shaped steel, channel steel, H-shaped steel, and different metal plates. It is widely used in different electricity and construction industries.
The hydraulic pump makes drilling holes simple and compact thanks to its power source, a hydraulic motor. It is capable of producing 49 tons at maximum pressure of 10,000psi and weighs only 63lbs. It includes optional accessories, such as a hose chord assembly, spanners, sub handle assemblies and toolboxes, a 22mm push & die, a 4mm Allen screwdriver, lockout assembly and a spring balancer.
Our range of this machine can swiftly punch various special-shaped holes like round and oblong holes. It also features a backup switch that stops the punch immediately at any time. This single-acting hydraulic has a compact design powered by a hydraulic pump but has manual and electric hydraulic pump options( you can select any one based on your industry needs).
Hydraulic punches are modeled to puncture metals with round, square or oblong holes. They are specifically designed to operate on mild steel, non-ferrous metals, and non-shattering plastics.
The 35-Ton hydraulic punching machine weighs 31 pounds and punches quickly. The dual-action remover holds the material and strips it so that you can punch the next hole in just seconds. It is suitable for punching railings, I-beams, tower iron, truck frames and truck frames. The maximum tensile strength is 65,000 Psi. Mount it to your work bench, or bring it to your job site. In less than 24 hours, rectangular, square or hex tools can be ordered.
Built with high-quality steel welded machine structures, it offers excellent temperature relief, rigidity and precision as well as durability. You can choose between manual and electric hydraulic pumps.
The single-acting, portable hydraulic punches can be used extensively in construction, the electricity industry, and other outdoor fields. The maximum punching thickness is approximately 16mm. It can also punch 24mm diameter and 110mm throat depth.
The machine has a dual-action design that reduces cycle time. It also allows for minimal material handling which results in highly efficient holes when compared to other processes.
You can easily adjust the mold to fit different sizes and shapes of holes.
Portable single-acting hydraulic punches are ideal for punching smooth and accurate holes in a short period, making them remarkably faster and better than drilling. It features an automatic punch, returns, and reset operations, making it ideal for various materials such as angle steel, channel steel, H-shapes, and flat sheet(copper plate, aluminum, iron, and steel plate).
Hydraulic punches are typically controlled by hand pumps, hydraulic, gas or electrical control pumps. The hydraulic punches can also be formulated up to 10,000 psi. Hydraulic punches can be used for operations that require hand twist drills and mag drills.
Our Porta Punch Package includes the 35 Ton C-Frame and an Electric/Hydraulic Pressure Pump. It also comes with a 10' or 20ft Hose and four sets if stock Punches and Die. You can choose from sizes 1/4", 5/16", 6/8", 7/16", 1/2"", 17/32", 9,/16", 5/8", 11/16", 1/2", 3/4", 25/32", 13,16" and 13/16".
This machine is constructed with great steel welded structure. It offers temperature relief, rigidity, precision, and long-term durability. There are two types of hydraulic pumps available: manual or electric.
Remove a piece of aluminum foil. To sharpen the blades of a three-hole punch, make sure the foil is long enough to cover all three holes. Pull off enough to sharpen all of the punches at once for one-hole and decorative punches.
A punch press has two cooperating components: the punch, which is attached to the machine's reciprocating ram, and the die, which is clamped onto a bed or anvil with a flat surface perpendicular to the ram's path. When in use, the punch pushes against the workpiece held in the die.
A knockout punch, also known as a chassis punch, panel punch, Greenlee punch, or Q-max in metalworking, is a hand tool used to punch a hole through sheet metal. It is a simple tool made up of a punch, die, and screw.