Our range includes portable hydraulic punches that can be used double-acting and have a diameter size of 27mm. They also have a maximum thickness of 13mm steel and a maximum throat depth 60mm.
Some maintenance tips: Always clean the punch and die. Although they do not need lubrication, cleaning can extend their durability. Make use of only Enerpac Oil in both punch and pumps. Match punch and die appropriately at all times. For operations, ensure you set up dies with bigger openings to point downwards. Ensure you change cracked, chipped, or worn-out punches and dies immediately. Always observe the suited lifting force to avoid cracks while processing materials.
Gulf States Saw & Machine Co. offers portable double-acting hydraulic punches that provide a complete mechanized process of punching and revert through its inbuilt dexterous control device along with inching (manual mode) and automatic load recognition.
This machine's powerful motor generates an equivalent output force of a hole reaching 31T. It is made with durable metals. The machine's exterior surface is coated to prevent rust and increase strength and durability. The hydraulic pump makes it easy to punch holes.
Gulf States Saw & Machine Co. provides the best solution for hydraulic punching machine. They can quickly and precisely punch special-shaped holes such as rectangular, square, H type e.t.c. in various steels, including brass, stainless, copper, aluminum and many others. Our range of portable hydraulic punches with double-acting capabilities is used in multiple industries.
Hydraulic punches may be controlled by either hand pumps or hydraulic, gas, and electrical control pumps. They can be formulated to 10,000 PSI. Hydraulic punches are used in operations that involve handheld twist drills, or mag drills.
If accuracy and portability are your top priorities, then you have found the right place. We have a range of punches to suit your needs. You can contact us to request and receive recommendations. We are available to meet all of your technical requirements with the utmost satisfaction.
Double-acting hydraulic punches with portable portability can process a wide variety of shapes, regular and oblong punches, as well as dies.
They are powered by air/hydraulic.
Portable double-acting hydraulic punches can process a diverse range of unique shapes, regular, oblong punches, and dies.
Our Porta-Punch is the quickest and easiest way to punch up to 13/16" Round Holes in 3/8" thick mild steel with a MAXIMUM tensile strength of 65,000 psi.
Here are some maintenance tips: Make sure to clean the punch and die. They don't need lubrication but cleaning can prolong their life expectancy. Use only Enerpac Oil for both the punch and pump. Always match punch and die correctly. You should set up larger openings so that the dies point down for operations. Make sure to immediately replace cracked, chipped or worn-out dies and punches. To avoid cracks in materials processing, always use the appropriate lifting force.
They are powered using hydraulic/air.
Equivalently, the powerful motor of this machine produces an output force for a hole that reaches 31T. Its outer surfaces are painted to protect against rust, provide strength and durability. The hydraulic pump can punch holes quickly.
Remove a piece of aluminum foil. To sharpen the blades of a three-hole punch, make sure the foil is long enough to cover all three holes. Pull off enough to sharpen all of the punches at once for one-hole and decorative punches.
A punch press has two cooperating components: the punch, which is attached to the machine's reciprocating ram, and the die, which is clamped onto a bed or anvil with a flat surface perpendicular to the ram's path. When in use, the punch pushes against the workpiece held in the die.
A knockout punch, also known as a chassis punch, panel punch, Greenlee punch, or Q-max in metalworking, is a hand tool used to punch a hole through sheet metal. It is a simple tool made up of a punch, die, and screw.