MCWlaser PRO, a split-type machine that includes both the laser source as well as the engraving machine, is called MCWlaser PRO.
With Triumph's 30W desktop fiber laser, you will get two lenses. One gives 4.3" x 4.3", and the other gives a 7.8" x 7.8" engraving area.
A fiber laser is the best choice for laser cutting/engraving metal parts such as aluminum, brass, or other metals.
A special type of fiber laser known as MOPA fiber laser, provides greater control over pulse width and frequency parameters to produce color laser engravings on metals.
Gulf States Saw & Machine Co., FM1212-50S does not come assembled. However, it comes in modules that can be easily attached by referring to their user manual.
So you need to use a 30W or 50W fiber laser for upgrading the engraving area to 7.87" x 7.87" or 11.81" x 11.87".
How plasma works can get a little complicated. So, I’m explain as simply and quickly as possible. Plasma cutters basically heat up gas so much that it gets hot enough to melt metal. Then, when the metal is heated up enough to melt, it is blown away with gas to make the cut. There’s a complicated science behind this, but I’ll save that for another day! (or you can research on your own if you like).
Raycus 50W fiber-laser can be used to engrave steel at 90 degrees angles. It uses 100% of the laser's power.
Delivering precise and consistent cutting for metal, Fiber Lasers from Gulf States Saw & Machine Co., allow you to drastically improve production and quality at the same time.
Highly configurable and expandable, the RAPID keeps everything moving quickly and efficiently well into the future.
Boss Laser offers CorelDRAW 2020 as an add-on to the FM-Desktop machine.
Once you have gained access to the machine using RetinaEngrave Version 3.0, it is possible to begin your first task. This is possible in just 30 minutes.
It is suitable for engraving on metals and can engrave at a maximum speed 11.760 ipm. It can mark complex fonts and images on both smooth and uneven metal parts.
You can use 100% of the laser power to engrave stainless steel with a 30W fiber laser at a 90deg angle.
Laser fiber cutting machine
Fiber optic laser cutters are intended to cut metal at high speeds and with pinpoint accuracy. These machines, which have been on the market for more than 20 years, also use a fiber laser power source.
What Materials Can Be Cut With A Fiber Laser? A fiber laser cutting machine can cut sheet metal such as carbon steel, stainless steel, copper, brass, aluminum, and titanium. Fiber lasers outperform CO2 lasers in cutting reflective materials.
In fact, the diode module in a fiber laser typically outlasts other technologies by three times. Most lasers have a lifespan of about 30,000 hours, which equates to about 15 years of use. Fiber lasers have an expected life of 100,000 hours, which equates to 45 years of use.