At the heart of a fiber laser is the laser source and they do not have any gaseous medium in it like in a CO2 laser.
Raycus 50W fibre laser can engrave on stainless steel at a angle of 90 degrees. This laser uses 100% of its power.
FSL Muse Pandora allows you to raster engrave on aluminum and steel as well as nickel, copper or silver.
Gulf States Saw & Machine Co., FM1212-50S uses a Raycus 50W solid-state fiber laser with the fiber source having a lifetime of 100,000 hours.
The heart of a fiber laser's operation is its laser source. They do not contain any gaseous material like a CO2 laser.
Since the working medium adopted by the laser generator is in the form of an optical fiber, its features are affected by the transition properties of the optical fiber. The pump light entering the fiber generally has multiple modes, while the signal photoelectric may have multiple modes. Different pump modes have different effects on different signal modes, making the analysis of laser generators and amplifiers more complicated. The doping distribution in the fiber also has a great impact on the laser generator. In order to make the medium have gain characteristics, working ions (that is, impurities) are doped into the fiber. In general, working ions are evenly distributed in the core. However, the distribution of pump light of different modes in the fiber is non-uniform. Therefore, in order to improve the pumping efficiency, the ion distribution and the pumping energy distribution should be as close as possible. When analyzing the laser generator, in addition to the general principle of the laser generator discussed above, it must also consider its own features, introduce different models and adopt special analysis methods to achieve good analysis results.
Designed by Mitsubishi engineers and built with Mitsubishi components, the GX-F Series is one of the only laser systems in the industry with a single source for service and support.
The laser module uses an F-theta(?) lens with high energy uniformity, narrow focus spot, and low attenuation.
Triumph's 30W desktop fiber-laser can engrave on aluminum and gold, silver and stainless steel. It also works with some plastic-like materials for machine parts and tools.
MCWlaser PRO has an adjustable Z-axis, moved manually up and down with a control wheel. Unfortunately, XY axes are not adjustable.
Triumph Laser offers EZCAD2.0 laser control software for their desktop laser engraver machines (30W). EZCAD2.0 allows you to create basic shapes and text.
Triumph's 30-W desktop fiber laser is able to engrave metal parts and tools, including aluminum, gold, stainless steel and copper.
I evaluated these fiber laser laser engravers and selected them based on their size, material ability, laser power upgrades, laser safety, line motion, and software.
Laser cuts metal using light. Laser uses light to pierce and to cut metal. Think of a magnifying mirror that can be used as a magnifying device to focus sunlight on a single spot and then burn it. That's how cutting light works.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.
Thin carbon fiber mat can be cut with some fraying - but not when coated. The laser can cut or etch. The laser can cut materials such as wood, paper, cork, and some plastics.
Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.