How To Become A Sidemount Technical Scuba Diver Hand Signals

How To Become A Sidemount Technical Scuba Diver Buyer

Since the beginning of the century, one of the most significant changes in the equipment cave divers use has been the shift from backmounted doubles to sidemount. Not only do a substantial number of cave divers now sidemount, it’s possible that there are more open-circuit sidemount cave divers than backmount cave divers.

2 first-stage regulator, 2 2nd-stage regulator, an exposure suit with side pockets and a BCD sidemount. A diving spool, mask and a spare mask. Technical diving equipments. 1 long, 2.10m to 7.10ft hose.

The next day it was on to technical sidemount, which means adding our deco 50-percent oxygen and 100-percent oxygen tanks on either side. This increases your profile underwater so you must keep the tanks as trim as possible against your body. You have a couple of clips on each side of your waist. As you breathe down your tanks and they become positively buoyant, you adjust your tank position to the second clip position. The aim here is to be as streamlined as possible. Every few minutes you also switch your breathing from one tank to the other. That way the pressure in each tank runs down at roughly the same rate, and if there is a failure with either tank or regulator, you’ll still have gas to breathe. As with all new things, building up experience is key to comfort and enjoyment. I spent the next few days doing deco dives with the sidemount rig, buddied up with Evolution co-owner David Joyce — a hugely experienced Tec diver and Trimix instructor. On one dive we visited the Japanese Mogami wreck down at 164 feet, where I was beguiled by the bits of old gas masks, uniforms and even a few bones we saw.

We offer the TDI course as an option, although we can also teach the SDI course if asked. This course can be taken on its own, or with the Apprentice Cave Diver course.

Tao Thailand

If you plan to go sidemount, particularly if you are a tec diver already, you will need to learn about your new rig. How to adjust it, how it can be used to enter the water, and more.

Computer-aided instruction is an integral part of nearly every course we teach. The Why? is simple: eLearning helps get our students in the water sooner and spend more time there. It’s why we include the cost of any applicable eLearning programs — usually a $140 value — in our courses at no extra charge. This translates directly into an extra day of in-water training. The value of that? Priceless.

Tao Thailand
Can you drink alcohol after scuba diving

Can you drink alcohol after scuba diving

Technical diving can be defined as being exposed to a ceiling that prevents a diver from ascending to the surface during a dive. This could be caused by a ceiling (in terms of a cave, a wreck, etc.) or a virtual ceiling that is created by a decompression duty. To avoid decompression sickness, it is necessary to perform mandatory decompression stops on ascent if you exceed the NDL. This requires special equipment such as a Twinset or Sidemount. Special equipment such as Twinsets and Sidemounts, gas mixtures with special properties, and additional training are required to be able perform the stops on ascent accurately to maximize Nitrogen off-gassing.

You can learn the SSI technical diver course and dive with up to four tanks (cylinders), for extended dives. The technical sidemount diver class is a great way for you to start technical diving. You will learn how to manage multiple cylinders during one dive. Also, learn how to configure your sidemount gear and set up a tec harness.

How To Become A Sidemount Technical Scuba Diver Marine

Do you want to share the experience? PADI eLearning (r) can be purchased online and shared with a person of your choice. You can purchase the course for a gift or assign it to family members. It's easy!

Gear - While the gear remains the same, divers taking an introductory tech class, such as Sidemount, Intro to Tech or CCR air diluent, will notice some configuration differences. Instead of two second stages on one cylindrical, they're divided between two with a separate initial stage for each. The gas planning becomes a more in-depth process, and the harnesses appear to have more chrome.

How To Become A Sidemount Technical Scuba Diver Near Me
How To Become A Sidemount Technical Scuba Diver Near Me

One of the big risks for a technical diver is decompression sickness. It occurs when nitrogen gas cannot exit the body thru respiration on ascent as the ambient pressure decreases. Therefore stops have to be executed on ascent in order to avoid a pressure difference too big so nitrogen bubbles can be formed. Buoyancy control is very important to control the stops on ascent and increase efficiency for off-gassing of nitrogen. Another important skill is proper breathing which makes metabolism efficient. Trim, which we call a proper tech diving position such as horizontal with a slight arch in the back, looking forward and knees at a 90 degree angle with fins pointing back. Trim prevents stirring up sediments on the bottom as well as most efficient movement in the water. And of course proper finning techniques to avoid overexertion are mandatory to make a diver achieve maximum performance. Now you might say, we want to have fun when we go diving and not be a machine.

Give the gift of adventure and share the experience. PADI eLearning can now be purchased and shared with a chosen recipient. It doesn’t matter if the course is being purchased as a present or you wish to make it available to family members.

How To Become A Sidemount Technical Scuba Diver Hand Signals
Cylinders

The sidemount rig was originally invented for cave diving as it allows the diver to pass thru cracks and restrictions (tiny holes) easier than the classic back mount rig.

‘Shadow Divers’ by Robert Kurson is about the identification of a German submarine that was tried to be identified by John Chatterton and his crew during almost a decade.

Check our other pages :

Frequently Asked Questions

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

- Increased Bottom Time A Closed Circuit diver is not concerned with running out of gas because they are only limited by decompression. This can also be reduced by selecting an oxygen partial pressure that provides the diver with virtually limitless bottom times in 60 feet or less of water.

2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).