I Want To Be A Scuba Diver

How To Become A Sidemount Technical Scuba Diver Youtube

One of the most important changes in equipment cave divers have made since the start of the century was the switch from sidemount to backmounted doubles. Sidemount is a popular choice for cave divers. It's also possible that sidemount cave divers are more common than backmount cave divers.

The next day was technical sidemount. This means that we added our deco 50 and 100 percent oxygen tanks on either side. This can increase your profile underwater. It is important that you keep your tanks as small as possible. The clips can be found on each side. As your tanks become buoyant, you will adjust your tank position to fit the second clip. Here, the goal is to be as efficient as possible. Each few minutes, you switch your breathing between the tanks. By doing this, the pressure in each of the tanks will decrease at roughly the exact same rate. In the event that a tank or regulator fails you will still be able to breathe. It is important to gain experience with any new thing. I spent the next few nights doing deco dives with the sidemount rig. I was buddied with Evolution coowner David Joyce who is a very experienced Tec diver as well as a Trimix instructor. One dive saw us visit the Japanese Mogami Japanese Mogami sank at 164 feet. It was here that I was seduced by old gas masks and uniforms as well as a few bones.

To dive, you must have a minimum of fitness and good health. Before diving, you may need to be cleared by a doctor if your health is not in good condition.

The sidemount rig was initially created for cave diving. This allows the diver through small cracks (tiny holes) more quickly than the back mount rig.

Contact Form

If you are not ready to dive locally, but wish to support your local dive center, you can complete eLearning courses and coursework close to home. You can then travel to complete your training dives. Ask your local PADI Dive Center for a referral.

There are three parts to certification. Knowledge development, skill practice and open-water diving. You can do all three on your own, or take a break to complete one of them.

Contact Form
How To Become A Scuba Regulator Technician

How To Become A Scuba Regulator Technician

JavaScript is used to create our contact form. This means that you will be able fill out our contact form. To activate JavaScript in the browser or temporarily deactivate your add-blocker from our website (we don't have adds).

In addition, your Sidemount rig includes tank bands, clips, and probably some more bungees to stow away your regs nicely. The clips will be connected to your harness and again, their position is important for the position of your tanks.

Side Mount Scuba Configuration

New gear means new techniques. Even though sidemount diving is simple, you will need to master some new skills.

Skills (generally) - An introductory tech diver will practice his trim and buoyancy using the new equipment configuration. This is the first step to efficient diving. Once this foundation is established, the student can begin practicing locomotion before moving on to more advanced skills.

Decompression
Decompression

For dives deeper than 56m gas mixes called Trimix are used. In order to reduce narcosis and reduce the toxic effects of Nitrogen and Oxygen, Helium is added which has no negative effect on our body to very deep depth. There are additional risks with helium but those start at depths of around 180m. In history tests have been executed with different noble gasses, however they all turned out to be toxic for the human body, so helium was the only one adequate for diving. One other gas that has no effect on the human body is Hydrogen but due to its high risk of fire and explosion in contact with oxygen, the blending of it is very difficult if not almost impossible with the techniques we use currently.

Sidemount Diver was one of my most challenging courses. This was due to the fact that my instructor Fiona, from Big Blue Tech, a trusted dive center in Koh Takao, included more skills and dives than I needed. My task load was always manageable so we practiced skills repeatedly. This included mask removable, tank removable underwater, out of air drills, and SMB deployment. We also kept our trim.

I Want To Be A Scuba Diver
Rescue Diver

The entry-level tech diver will be trained to optimize their equipment to reduce drag and avoid dangling gear. This will ensure a maximum profile for efficient propulsion, awareness and propulsion.

Technical diving was something that I never had an interest in at first. I remember laughing at the Tec divers and wondering why anyone would need more equipment. I love the feeling you get when you are close to nature. Tom had a reputation for being an inspirational teacher. It seemed to me that I should at least try.

Check our other pages :

Frequently Asked Questions

To register for the PADI Advanced Rebreather Diver course, you must first: You must be a PADI Open Water Diver, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.

Have a PADI Deep Specialty Instructor certification or have completed a PADI Deep Specialty Instructor course. Have at least 100 logged dives, including at least 20 enriched air dives, 25 dives deeper than 18 meters/60 feet, and 15 dives deeper than 30 meters/100 feet. You can become a Tec 45 diver.
 

from 170 to 350 feet
While conventional scuba diving has a recommended maximum depth of 130 feet, technical divers may work at depths ranging from 170 feet to 350 feet, and sometimes even deeper.