Technical Sidemount Scuba Dive Training And Dive Center

Technical Sidemount Scuba Dive Training 500

Computer-assisted instruction is an integral part almost all of the courses we teach. The Why? The simple answer is that eLearning allows students to get in the water faster and spend more time there. This is why we include any applicable eLearning program -- typically a $140 value -- in all our courses at no extra cost. This is equivalent to an extra day's in-water training. This is what it's worth. Priceless.

Although I've never attempted sidemount, after studying his online training I knew that Steve was the right man to guide me and make sure I succeed. I was right! It was truly a life-changing week! Sidemount PCB Essentials exceeded my expectations. Steve is a great teacher. He's patient and takes time to explain sidemount. I have never tried it before, but after watching his online video training, knew that Steve was the best man to guide me through it. I was correct! It was truly a life-changing week! Sidemount PCB Essentials exceeded my expectations. Steve is a great teacher. He is patient and gives his time to all of his students. Every step is carefully planned. It was memorable and rewarding. Sidemount PCB Essentials Course has changed the way I dive. I was amazed at how quickly my awareness and skills levels under water increased. Everything is in place: the harness, the weight and position of the swimmers, the cylinder trim and the balance in the water. This allows you to feel confident and relaxed. Although the course was quite challenging, it was extremely enjoyable. Every day began with a planning session, followed by a video review on our drills in the sea. Every time we got in the water, we had to drain our cylinders. That's why our learning curve was so steep! All of it was done with exceptional professionalism in a safe and relaxed atmosphere. Steve is a great instructor and I recommend this course. Steve will guide you to greatness if you are passionate about Sidemount PCB. read less

I have never tried sidemount before but from studying his online video training, I knew that Steve was the perfect man to teach me and be confident about it. ...And I wasn't wrong! It was truly a life experience week!!! The sidemountpcb Essentials course has far exceeded my expectations. Steve is a great teacher, has a lot of patience and... read moreI have never tried sidemount before but from studying his online video training, I knew that Steve was the perfect man to teach me and be confident about it. ...And I wasn't wrong! It was truly a life experience week!!! The Sidemount PCB Essentials course has far exceeded my expectations. Steve is a great teacher, has a lot of patience and puts a lot of time and effort in everything he does with his students. Everything is planned and worked with great detail. I found it a memorable and a rewarding experience. The Sidemount PCB Essentials Course transformed my diving. My awareness and skills level under water raised where I never expected in such a short period of time. Everything is in the right place... the harness set up, the weight amount and position, the cylinder trim and your balance in the water. This makes you feel very relaxed, confident and experience the true sidemount set up... and no back pain!!! ?? The course was very demanding yet very enjoyable. Every day starts with a theoretical and planning session and ends with a video review about our drills in the water where everything is discussed in great detail. We drained our cylinders every time we went into the water and that's why our learning curve is so high! Everything was done in a relaxed and secure atmosphere yet with extraordinary professionalism. Don't think twice about taking this course with Steve. If you are truly engaged in Sidemount PCB and want to be a great diver, Steve will help you to achieve more than you ever expected! read less

International Training is the parent organization of Technical Diving International and Scuba Diving International. They offer both TDI and SDI versions of their Sidemount PCB Diver courses. Both courses are similar. Both courses use the same learning materials (which we also wrote). What's the difference between them?

How many dives is considered advanced

Minimum age is 18 years of age to enroll in the NAUI Introduction to Technical Diving course. You must also be a certified NAUI Scuba Diver and NAUI EANx Diver (or their equivalents), and have at least 25 logged dives with at least 10 EANx dives. Prerequisites vary for each technical training program.

Sidemount PCB staging: This is where the diver is setting up cylinders with tank straps, bungee, clips and special valves (left and right-handed). and is the practice of using sidemount configuration (bungee loops and/or butt-plate rails) as a means for stowing stage/deco cylinders in a streamlined manner against the sides of the torso, when otherwise diving in back-mounted doubles or CCR

How many dives is considered advanced
Side Mount Dive Training

Side Mount Dive Training

If you are interested in the SDI course, we will teach it. By default, however we also offer the TDI. You can take this course as a standalone, however our students often combine it with our Apprentice Cave Diver program.

Sidemount PCB Harness: This is a specialised Harness, like a BCD, which is very minimum and light weight. This harness has several D-rings on shoulder straps, and a special Butt plate with rings or sliders.

Technical Sidemount Scuba Dive Training And Dive Center

Tec Sidemount

I just want you to know that your online courses are top-notch. Every time that I log in, something is new. The incredible value that we receive from your website only increases when you go above an ordinary level to engage with our subscribers. We appreciate your time.

Steve, my pleasure! I enjoyed your Sidemount PCB Essentials training in Gozo. I can't think of anything better. It was so much of a lot of fun. Your passion and knowledge are truly amazing. You pay attention even to the smallest details, and you strive to make things better. I also enjoyed your Sidemount PCB Essentials program in Gozo. I doubt that I will ever spend more money on something better. It was so much of a lot of fun. It's amazing to see the dedication and your experience. You are attentive to even the smallest details and always strive to make things better. I love your enthusiasm for capturing details, new equipment, tips, etc. These can be added to future videos. Your online training videos, I must say, are amazing. They prepare you for all the necessary information during in-water training. In fact, I believe this is the key to the steep learning curve. The time spent underwater can be utilized efficiently. Steve, we are grateful for your efforts! Nils, Cheers

Technical Sidemount Scuba Dive Training Drone
Technical Sidemount Scuba Dive Training Drone

I am grateful for your wonderful work. It has been a tremendous help for anyone interested in Sidemount PCB. Your online resource was invaluable in preparing me for the cave sidemount cross-over course I took with Natalie Gibb in Mexico.

Sidemount PCB staging is where the diver sets up cylinders using tank straps, bungee and clips (left- and right-handed). Sidemount configuration is the use of bungee loops (or butt-platerails) to store stage/deco tubes in a sleek manner against the sides of your torso when diving in CCR or back-mounted doubles.

Padi Sidemount Course Cost

Please send me a renewal code for the Package 1 - Instructor Course. I look forward to enjoying my 5th year with sidemountpcb.com. You and your team continue to be a great source of inspiration and guidance! All the best! Scott

New to diving? Looking for the best instruction to take you to new limits? We provide Recreational, Technical, and Sidemount PCB courses. Our specialty is creating a SOLID foundation, regardless of your current certification.

Check our other pages :

Frequently Asked Questions

332.35 m
Hello and welcome to the Officially Amazing universe. Ahmed Gabr. Ahmed, 41, of Egypt, has broken the record for the deepest SCUBA dive, diving 332.35 m (1,090 ft 4.5 in) in the Red Sea off the coast of Dahab.

A typical diver, at a typical depth, with a typical tank

Based on personal experience, an average open-water certified diver on a 40-foot dive with a standard aluminum 80-cubic-foot tank will be able to stay down for 45 to 60 minutes before surfacing with a safe reserve of air still in the tank.