Technical Sidemount Scuba Dive Training Guide

Scuba Diving

They are not issued unless earned. Not just taking part in the course does NOT guarantee certification. For cave courses certification cards may be available from multiple training agencies. C-cards can be purchased for around $30 depending on the agency. An instructor will be able to tell you more.

International Training, the parent organisation for Technical Diving International / Scuba Diving International (TDI), offers both the SDI and TDI versions their Sidemount PCB Diver course. Both courses are very similar. Both courses share the same learning materials (which were written by us). What is the difference?

If the course is successfully completed, graduates are eligible to participate in sidemount dive activities under supervision.

As your goal in taking this course is to learn the basic set up and operation of the equipment you will use as part of your cave and/or tech diver training, you will need that same equipment for this course. This includes:

Technical Sidemount Scuba Dive Training Day

Sidemount has never been something I tried before. However, from watching his online video training, it became clear that Steve was the ideal man to show me how and give me confidence about sidemount. It was an amazing experience, and I didn't regret it! It was truly life-altering! Sidemountpcb Essentials exceeded my expectations. Steve is a great teacher, has patience, and... I was absolutely right! It was truly life-changing! Sidemount PCB Essentials was beyond my expectations. Steve is an excellent teacher. He's patient, hardworking and puts in a lot to every lesson he gives. Everything is planned and done with great attention to detail. It was an unforgettable and enjoyable experience. Sidemount PCB Essentials Course completely transformed my diving. In such a short amount of time, my awareness level and skills were higher than I could have ever imagined. Everything is in place, including the harness setup, the weight amount, position, the cylinder trim, as well as your balance in and out of water. This will make you feel calm, confident, and allow you to experience sidemount setups that are truly comfortable. The course was difficult but enjoyable. Every day started with a planning session. Each day ends with a video review and discussion about the drills we performed in the water. The learning curve is high because we had a tendency to drain our cylinders whenever we were in the water. Everything was done in a relaxed atmosphere, with great professionalism. Steve will make this course easy for you. Steve will help to make you a better diver! read less

I'm sure you get this all of the time, but I really do appreciate your online videos. I have used them to get my sidemount set up much better, and as an instructor, I have also been able to diagnose student issues and remedy them much more quickly. So, I want to thank you very much for that

Technical Sidemount Scuba Dive Training Day
Technical Sidemount Scuba Dive Training Gym

Technical Sidemount Scuba Dive Training Gym

Sidemount PCB Diving began in the early years cave diving. Lamar Hires pioneered this technique by using multiple tanks in an efficient and compact manner to reach places that back mounted divers couldn’t. As the sport grew, this technique evolved and became one of the fastest growing.

TDI Advanced Nitrox and Decompression ProceduresThese are the first two classes of technical diving and represent the first step on the road to becoming an elite diver.Best taken together, these classes will train you to safely use gas mixtures with up to 100% oxygen and execute staged decompression diving to a depth of 150'.

Naui

Sidemount diving is allowed after successful completion of the course. This is subject to the following restrictions:

Sidemount PPB diving is growing in popularity within technical diving communities for general compression diving. It has become an increasingly popular specialty training for recreational divers with numerous certification agencies offering technical and recreational sidemount training programs.

Technical Sidemount Scuba Dive Training Guide
Steve
Steve

You should know what you are getting. Prices include instruction fees and eLearning fees. Keep in mind that eLearning can cost anywhere from $140 up to $280. If you pay for elearning separately, then a course costing $640 from us could be the same price as a course costing $500 from another source.

Steve, Your tutorials were amazing and an excellent addition to any instructor’s toolbox. I am a PADI instructor in Cyprus. After taking a few courses, I was able to master this style of diving. Although it originated in cave diving, it has gained popularity among recreational divers. But, only by using your technique, I have been able to certify competent and confident sidemount diver. I teach PADI Cyprus and have completed a few courses in order to master this type dive, which although originated in cave diving, is becoming very popular among recreational divers. I learned that your technique only allowed me to certify competent and confident sidemount diver. Sidemount diving, I know, is not difficult for any dive boat or Dive guide. I also know they will be safe and appear sleek underwater. You have a structured approach that explains every aspect of sidemount dive, including the configuration. Any instructor who is teaching sidemount I would highly recommend this! Thank you! read less

How long can you use a rebreather

Qualifying certifications from another diver training organization may also be available - ask your Tec Sidemount PCB Coach.

Learn immediately by purchasing the PADI Sidemount PB Diver and PADI Tec Sidemount PB Diver Manual at your local PADI Dive Shop. If you have a recreational certification as a sidemount diver, you will focus on Chapters Two & Three. If you don't, you will need to read the entire manual.

Check our other pages :

Frequently Asked Questions

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

What exactly is the Tec 40 Course? Your first step into technical diving is the PADI Tec 40 course. It is a fundamental level of decompression diving that allows you to dive with gas redundancy, higher Enriched Air mixes of up to 50%, decompression on EANX 50% for conservatism, and up to 10 minutes of decompression.

The PADI Rebreather/Advanced Rebreather Diver courses take four days to complete. The course fee is $1250, which includes books and rental.