Cnc Drill Line Motor
It is no good having a CNC drilling machine if it doesn’t enable a fabricator compete at the top of the steel fabrication field. Advantage-2 allows you to process technical programmes with speed and intelligence. Each drilling axis includes three five-station tool changers. Each can drill, countersink and tap as well. Signomat underside scribers or part stamping units are also possible to be fitted to this drill-line. Part information is kept even after blasting, painting and galvanizing. Minimizing shop errors? Check. Advantage-2 drills more aggressively and produces more holes than any other line of drilling. High torque drilling axes have thicker, more aggressive cuts that extract more chips with each turn. This drill line can eat through beams as well channel, angle and tube. Advantage-2 is able to process any profile up to 44 inches wide x 18 inches tall.
Each of our beam drill line machines have linear guides, central lubrication, and a tool cooling system to ensure smooth operation and lower maintenance. Within each coordinate system there is a 4 station tool changer, allowing it to drill, mill, scribe, counter sink, or tap as needed; tools can even be swapped out mid-operation easily and without disruption. Positive beam positioning consists of an arm attached to a rack and pinion system on the feed conveyor to more accurately position the beam as it goes through the drill line, maintaining .004”, making our steel beam drill lines much more accurate than friction roller machines.