Ocean Avenger Drill Line

Cnc Drill Line Is It Anyway

This ability to mill efficiently speeds up project completion. The Advantage-2 user-friendly Raptor 3DCAD/CAM software allows the operator to quickly program parts. The 3D platform allows you to inspect, modify, and export your part information. Advantage-2 drill's greatest advantages are the ability to scribe and mill slots as well as large lifting holes. This machine is truly unique. The scribing allows us to place piece marks, layout lines, and center points. It's been great to have the flexibility to use it whenever we want and to make those decisions.

The Advantage-2 carbide drill line utilizes automatic tool changing technology and completely electronic ball screw feed spindle motion. This combined with Voortman' renowned build quality and mechanical design provide the ultimate combination of agility and strength.

The Franklin HD145 (3) spindle-cNC drill is 44 inches wide. The HD-145 can lift beams of up to 750 lbs per feet. The high-performance spindle design allows drilling speeds of up to 2000 RPM. The rigid design of the spindle allows for very aggressive feed rates, up to 300 ft per minute. There are many material handling options available for the Franklin HD145, from 300 lbs to 750 pounds per foot.

CNC Drill Line is a space-saving beam processing solution. It only takes up 70ft x 9.9ft. This makes it great for fabricators with limited space. CNC Drill Lines can also be placed outside, providing even more space for fabricators.

Cnc Drill Line Dirt

Cnc Drill Line Dirt

We have seen more than 1000 CNC Drill Lines, and angle lines installed all over the world. We found that the average operator can program a machine in half the time, even if they have never programmed one before.

CNC Drill Line not only processes beams and columns but can also easily process all steel profile including channel, flat, flat, base plates RHS, square and round.

Cnc Drill Line Zam

Advantage-2 uses a series support clamps to ensure that the workpiece is as rigid as possible through the machine. The minimum vibration is the best way to extend carbide tool life.

GSS Machinery staff and personnel have been a tremendous support to me. Without them, I believe we wouldn't be in the position we find ourselves in in the steel fabricating markets.

Cnc Drill Line Zam

Cnc Drill Line Wire Rope

The CNC Drill Line is programmed either manually on the machine or by using the Peddimat program. This software is included in the AVENGER. It can be installed on any number of computers in your office that you like. It is the exact same software as the machine, and it is also used on all Voortman CNC fabrication machinery.

Peddimat is incredibly simple and intuitive, and takes less than an hour to learn, even if you have never worked on a computer in your life.

Cnc Drill Line Is It Anyway
G Code Drilling

The CNC Drill Line not just drills holes in any profile of steel in a fraction the time it takes, but also marks the locations for all your welded attachments.

The CNC Drill Line is built exclusively for GSS Machinery by Voortman. Voortman handles the installation, warranty and service work on the CNC Drill Line. And while Voortman is the service provider, GSS Machinery is always there to get involved should the need arise.

Cnc Drill Line Zam

Check our other pages :

Cnc Drill Line Zone

This Morse Taper chuck adaptor permits you to use standard parallel shank drilling bits for smaller diameters. It has a maximum drilling diameter of 12mm. (12mm) and a minimum drill diameter of 3/64 (1mm).

Voortman inside technicians are often able to resolve any problem remotely. Voortman technicians can access your machine via an internet connection. Voortman equipment has a powerful Windows(r-based Siemens control which allows this capability and offers superior diagnostics through Windows(r).

Frequently Asked Questions

The strength tolerances of the C-beam are lower than those of the I-beam. This results in lighter components. Continue reading if you have never used C-beam profiles.

To reduce the chance of the beam escaping from the concrete column, the development length is required. It acts as a support member for the reinforced beam within the concrete column.

The shorter beam will therefore be stronger when carrying the same load. To compare beam strengths, it is necessary to take into account more than the section modulus.

3) Calculation for depth and width of continuous beam. Total depth = Effective depth + Diameter of Bar/2 + Clear Cover Size. The beam width is Depth/1.5. Beam width should not exceed 200mm The beam's total depth is the effective depth minus the diameter of the bar/2 and clear cover size.

Channels, or C-beams, are used when the flat back side of the web is mounted to another flat surface. This allows for maximum contact. Sometimes they are welded back-to-back to create a non-standard I beam.