Cnc Drill Line And Tap Machine

Beam drill lines are important tools in medium to large-sized structural fabrication shops. Beam drill lines accurately drill holes in a variety of steel profiles at different lengths with CNC controlled programming. These machines eliminate the need to manually chalk or layout the positions and produce the hole by hand with a mag drill, punch, or plasma. This cumbersome process can take weeks and multiple employees to do the job. A beam drill line eliminates manual layout and the associated errors.

GSS Machinery is often asked by customers which drill bits they should use: insert bits or twist drill bits. We want to make sure that our customers get the lowest possible cost per hole. This will allow them to be more competitive and profit. It is vital that customers fully understand the Insert Drill Bit (Spade Drill Bit) advantages.

Voortman will install and calibrate your machine once he is done. Then, he will meet with your operators and take them through the simple but comprehensive training program. They will be trained in:

Advantage-2 carbide drill line uses automatic tool changing technology, completely electronic ball screw-feed spindle motion, and fully electronic ball screws feed spindle. These combined with Voortman’s outstanding build quality and design make the Advantage-2 carbide drill line an ideal combination of strength and agility.

These drop-in stainless grippers allow you to secure base plates or flat bars, angle, or other profiles that might have rounded edges and want to push away the datum line.

Voortman technicians will complete the installation and calibration of your machine. After that, he'll spend time with operators and guide them through our comprehensive training program. Training will be given to your operators in:

The programming of the CNC Drill Line can be done even manually. Peddimat is the machine programming software and most operators can program most parts within less than an hour. Of course practice makes perfect. The best way to program the machine, however, is to import parts from a CAD drawing, preferably created in 3-D modeling software like ProSteel 3D or StruMis. These files can be imported directly into the machine. The operator simply selects the part and presses the Cycle Start button.

Automatic Edge Finder – The edge finder can be used manually (Jogging method & Screen Buttons), programmatically, or fully automated (dedicated programme). This option adjusts offsets and program rotation to match orientation and location on the cutting board.