Cnc Drill Line Numbers
The Franklin HD145 (3) spindle CNC drill, with 44-inch width capacity. The HD-145 handles beams up to 750 lbs per foot. The hi-performance spindle design provides drilling capabilities up to 2,000 RPM. This rigid design provides extremely aggressive feed rates up to 300 surface feet per minute. The Franklin HD145 can be provided with several material handling packages from 300 lbs per foot, to 750 lbs per foot.
"I believe without the help of the staff at GSS Machinery, we wouldn't be able to compete in the steel fabrication markets in which we are now competitive.
GSS Machinery has provided us with the best support possible in steel fabrication markets, which is something I am proud to say.
Advantage-2 employs support clamps that ensure the best rigidity for the workpiece. Carbide tool lives are best maintained with as little vibration as is possible.
"..In an attempt to meet customer requirements and increase output, we have built a new beam drill system. The lower labor cost and quicker turnaround times have resulted in us landing high-quality jobs.
This Morse Taper Chuck adaptor allows for standard parallel shank drill bits to be used when drilling smaller diameters. It permits a maximum drill size of? It permits a maximum diameter of 12mm (12mm) as well as a minimum diameter 3/64’’ (1mm).
Over the past decade the UNIST MQL lubricant system has become the dominant coolant system in the USA, and has become standard equipment on the Aveger FORTY, Avenger PLUS and Clipper. This minimum quantity lubricant is an oil based coolant that promotes longer tool life. It is non toxic.
Beam drills are essential tools for medium-sized to large-sized structural fabricators. Beam drill lines can accurately drill holes in various steel profiles of different lengths and with CNC controlled programming. These machines remove the need to manually draw or lay out the positions. Instead, the machine produces the hole using a mag drill punch, plasma, or punch. This laborious process can take many hours and may require several employees. A beam drillline eliminates the need to manually plan and avoids any errors.
The CNC Drill Line is designed specifically for fabricators and general job shops that need to put holes in steel profiles of all types. Consider the following questions and determine if this machine fits your needs.
Voortman creates machines just for GSS Machinery, to meet our high standards. GSS Machinery targets smaller to medium fabricators, while Voortman targets large fabricators. Voortman has been manufacturing machines for GSS Machinery over 10 years. GSS Machinery, Voortman’s largest customer worldwide, is Voortman.
Yes. We have many CNC Drill Line installations outside. However suitable weather protection must be provided to the control panel and moving mobile platform. Please feel free to contact us to see photos from many of our outside installations.
Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.
Automatic Edge Finder - The edgefinder can be used manual (Jogging Method and Screen Buttons), programmatically using M &G codes or fully automated with a dedicated program. This option sets offsets and rotates the program to match location and orientation on the cutting surface.
Z-Reader Probe-- The Z-Reader Probe can be used to locate the surface. It can be used to programmatically or manually. This option is not activated while cutting and is easily retracted. It can be used to verify the surface of each pierce, or to map the entire surface before cutting begins. It starts by initializing or zeroing the device to a surface at the start of a program. After that, it accumulates or tracks any difference.
The shorter beam will therefore be stronger when carrying the same load. To compare beam strengths, it is necessary to take into account more than the section modulus.
Beams are designed to allow vertical deflections of no more than 1/180 (or 0.55%) of the horizontal beam length measured at the ends of beams.
Channels, or C-beams, are used when the flat back side of the web is mounted to another flat surface. This allows for maximum contact. Sometimes they are welded back-to-back to create a non-standard I beam.
As we all know, T-beam casting with slab is possible. Its flange absorbs compressive stress which means it will resist greater sagging moments of beam. The beam's depth is lower than ordinary beam, which gives you more headroom. For beam deflection reduction, T-beam is preferred over ordinary beam.
The strength tolerances of the C-beam are lower than those of the I-beam. This results in lighter components. Continue reading if you have never used C-beam profiles.