4 Spindle Drill Head

Cnc Drill Line Enterprises

As customers often bring a few pieces of steel with holes or layout marks, we train the operator to use Peddimat.

Voortman manufactures machines exclusively for GSS Machinery to meet our strict specifications. GSS Machinery is geared towards small to medium-sized fabricators while Voortman is aimed at larger fabricators. Voortman has been building machines in GSS Machinery's factories for over ten years. GSS Machinery is Voortman biggest customer.

6nc32 Drill Size

The CNC Drill Line can import DXF files and can use them to process 3-D shapes as long as the steel is detailed according to specific rules. Some of these rules might be different to the way you are detailing at the moment and might require some adjustment. This process is not nearly as seamless as the 3-D modeling software solutions above.

FlexBeam is an innovative machine tool that allows for quick, precise and economically produced steel profiles. This machine provides a cost-effective beam processing solution to small to medium-sized fabricators who are ready to handle larger jobs.

Cnc Drill Line Dead

Cnc Drill Line Dead

We train every operator on how to operate the machine using Peddimat. This is because you may be faced with a situation where a customer has a couple of pieces that need holes or layout marks. You want to be able produce these quickly and without disturbing your detailing staff, who might be working on a larger project.

Auto Standoff is currently defined as surface-stand-off. This should not be confused for vector standoff with 5-axis. The current auto stand off is based on a moving surface. It will adjust vertically based the angle at the "A" Axis. You can perform the vector change even if the machine is not running with the help of buttons on screen.

K-t Drill Press

Voortman’s Roller Feed Measuring system surpasses industry standards in roller measurement technology. The key to accurate measurements is not allowing for any production hesitations. Even when there are material variations, accuracy must be maintained.

Not only will the CNC Drill Line process beams and columns, but it also easily processes all steel profiles including channel, angle, flat bar, base plates, RHS, square, and round profiles.

K-t Drill Press

Lines

This Morse Taper chuck adaptor permits you to use standard parallel shank drilling bits for smaller diameters. It has a maximum drilling diameter of 12mm. (12mm) and a minimum drill diameter of 3/64 (1mm).

This adaptor for the Morse Taper Morse Taper drill bits allows you to use standard parallel shank bits when drilling smaller diameters. It can drill a maximum diameter of 12mm and a minimum diameter of 3/64'' (1mm). Maximum drill diameter is 12mm, minimum diameter is 3/64'' (1mm).

Cnc

Voortman AccuMeasure Roller Feed measuring system offers different options for saw measurement. AccuMeasure's versatility allows for easy handling while still providing a quick and efficient CNC solution. Splitting apart a drill or a saw makes it possible to maximize production.

"..We have drilled approximately 25,000 hole since we purchased our CNC Drill Line just four months ago. It used take us about 5 minutes each to drill and lay out each hole. It now takes us around. 30 seconds per hole... an 1875 man hour savings in four months. That is $84,375 at our shop. As you can see, this machine will be fully paid off in less then one year. It is not only faster than our production, but it also allows us to free up floor space for other jobs.

Cnc Drill Line Enterprises
K-t Drill Press

Check our other pages :

Cnc Drill Line Zip

The CNC Drill Line not just drills holes in any profile of steel in a fraction the time it takes, but also marks the locations for all your welded attachments.

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Frequently Asked Questions

The shorter beam will therefore be stronger when carrying the same load. To compare beam strengths, it is necessary to take into account more than the section modulus.

Beams are designed to allow vertical deflections of no more than 1/180 (or 0.55%) of the horizontal beam length measured at the ends of beams.

Channels, or C-beams, are used when the flat back side of the web is mounted to another flat surface. This allows for maximum contact. Sometimes they are welded back-to-back to create a non-standard I beam.

As we all know, T-beam casting with slab is possible. Its flange absorbs compressive stress which means it will resist greater sagging moments of beam. The beam's depth is lower than ordinary beam, which gives you more headroom. For beam deflection reduction, T-beam is preferred over ordinary beam.

The strength tolerances of the C-beam are lower than those of the I-beam. This results in lighter components. Continue reading if you have never used C-beam profiles.