Drilling Holes

Ocean Avenger Plus Cnc Beam Drill Line

Voortman exclusively designed and built the CNC Drill Line to fit GSS Machinery. Voortman oversees all aspects of the CNC Drill Line, including warranty and service. Voortman acts as the service provider. GSS Machinery will always assist should the need arise.

Voortman has shaped today’s CNC beam drill line standard with time-tested technology. The Advantage-2 processes an average of 150 tons of steel per work week with the most efficient drilling, milling, scribing, tapping and countersinking operations.

K-tool Drill Mill

We train every operator on how to operate the machine using Peddimat. This is because you may be faced with a situation where a customer has a couple of pieces that need holes or layout marks. You want to be able produce these quickly and without disturbing your detailing staff, who might be working on a larger project.

Auto Standoff is currently defined as surface-stand-off. This should not be confused for vector standoff with 5-axis. The current auto stand off is based on a moving surface. It will adjust vertically based the angle at the "A" Axis. You can perform the vector change even if the machine is not running with the help of buttons on screen.

K- Drill

K- Drill

The CNC Drill Line not just drills holes in any profile of steel in a fraction the time it takes, but also marks the locations for all your welded attachments.

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Cnc Drill Line Gen

This Morse Taper chuck adaptor permits you to use standard parallel shank drilling bits for smaller diameters. It has a maximum drilling diameter of 12mm. (12mm) and a minimum drill diameter of 3/64 (1mm).

This adaptor for the Morse Taper Morse Taper drill bits allows you to use standard parallel shank bits when drilling smaller diameters. It can drill a maximum diameter of 12mm and a minimum diameter of 3/64'' (1mm). Maximum drill diameter is 12mm, minimum diameter is 3/64'' (1mm).

Cnc Drill Line Gen

Flexible Coupling

"..We have drilled about 25,000 holes since we bought our CNC Drill Line around four months back. We used to need to drill every hole in 5 minutes. It takes us about. 30 seconds per hole = a savings totaling 1875 manhours in just 4 months. This saves us $84,375. This machine will pay for its cost in less that one year. It speeds up our production and frees up floor space to allow for additional jobs.

Remote assistance cannot diagnose every problem. Frequently, mechanical issues and questions that require the attention of a human eye are still being addressed. Voortman machines come with high-definition web cameras and software. This allows Voortman employees the opportunity to see the installation in action without leaving the office. This webcam is invaluable in countries where English might not be an option or situations in which it may be difficult to communicate effectively.

Cnc Drill Line Kit

The CNC Drill Line can import DXF files and can use them to process 3-D shapes as long as the steel is detailed according to specific rules. Some of these rules might be different to the way you are detailing at the moment and might require some adjustment. This process is not nearly as seamless as the 3-D modeling software solutions above.

FlexBeam is an innovative machine tool that allows for quick, precise and economically produced steel profiles. This machine provides a cost-effective beam processing solution to small to medium-sized fabricators who are ready to handle larger jobs.

Ocean Avenger Plus Cnc Beam Drill Line
Cnc Drill Line Gen

Check our other pages :

Cnc Drill Types

Voortman’s Roller Feed Measuring system surpasses industry standards in roller measurement technology. The key to accurate measurements is not allowing for any production hesitations. Even when there are material variations, accuracy must be maintained.

Not only will the CNC Drill Line process beams and columns, but it also easily processes all steel profiles including channel, angle, flat bar, base plates, RHS, square, and round profiles.

Frequently Asked Questions

1- T beams have a greater second moment inertia than ordinary beams. This means they are more resistant to bending.

To reduce the chance of the beam escaping from the concrete column, the development length is required. It acts as a support member for the reinforced beam within the concrete column.

Tempered steel Drill pipe is generally made of tempered steel. Drill pipe sections are usually between 30 and 33 feet in length. This is for cost-saving reasons as well as transport reasons.

Although c-channel can be a little more expensive than angle iron, it is much more durable in most cases. C-channel is preferred for projects that can be done without major engineering or expense.

Girders are long horizontal beams that serve as primary support for buildings. All other beams are connected to them, creating the "skeleton" of the structure. This is the easiest way to see the difference. Girders are large beams. All girders can be considered beams. However, not all beams can be called girders.