Fiber Laser Machinery 800 Nm

Fiber Laser Cutting Machine Brands

Laser cutting machines are expensive at first. They can cost 2x more than a plasma cutter initially. A plasma machine cost starts somewhere around 40,000+ and a laser machine is about 80,000+. Off course this depends on where you buy your metal cutting machine and how powerful it would be. There are some plasma machines that are as low as 15,000 and laser machine as low as 50,000. But like I said, it all depends.

Laser machines can be used to cut almost any type of material. The kind of laser machine used will affect the materials you can cut. However, a CO2 laser can cut through metals like copper, aluminum, and brass. They can however cut through nonmetallic substances like wood or plastic.

The FLCAJ’s fiber engine, combined with the fiber optic delivery cable, has greatly reduced machine operating costs and required maintenance. With no laser gas, mirrors, or moving parts in the laser source, and by consuming a fraction of the energy required by a comparable CO2 laser, the FLCAJ series makes laser processing more economical than ever before.

For expanding the engraving area, taller focal length lenses are used that require highly concentrated power.

Laser Beam

Laser Beam

FSL Muse Pandora can raster- and vector-engrave metals, such as steel, nickel and copper, silver, gold, stone, or leather.

Some PVC-based acrylics can release toxic fumes if they are heated. It is better that you check the chemical compositions before engraving.

Fiber Laser Cutting Machine Amada

The laser arm is held by the support column (Z-axis). You can adjust the laser focus by moving the Z axis with the height adjustment knob.

FSL Muse Pandora has the ability to raster and create vector engravings on aluminum, steel nickel, copper and silver as well stone and leather.

Fiber Laser Cutting Machine Amada

Laser Diodes

The laser used in this experiment is a pulsed-fiber laser with a wavelength at 1064nm. It has an estimated life span of more than 25,000 hours.

Safety glasses should be able to block laser light from 1064 nanometers when purchased for this machine.

Nukon Cnc

Laser machines can cut any material. The type of laser machine you use will determine the material that can be cut. A CO2 laser machine is unable to cut through reflective materials like brass, copper, and aluminum. However, they can cut through nonmetallic material like wood and polymer.

Plasma can cut almost any material that is conductive. Laser machines are unable to cut reflective metals like brass, copper, and aluminum.

Fiber Laser Cutting Machine Amada

Check our other pages :

Automation

GSS Machinery also provides auto-loading and unloading systems that can be integrated with fiber laser machines for maximum automation, increasing speed and efficiency for your processing requirements.

Higher focal length lenses, which require high concentration power, are used to increase the engraving area.

Fiber Laser Cutting Machine Brands

Frequently Asked Questions

Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.

Fiber lasers leave unsightly marks on wood.

The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.

Applications for the 50 Watt Fiber Laser Deep Engraving Machine:

Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.