Stock

Fiber Laser Cutting Machine Installation

Other accessories, such as lenses or fume extractors, can be purchased to enhance the machine.

Raycus 50W Fiber Laser can be used to etch and mark aluminum at 90 degrees angles. It uses 100% of the laser's power.

The enclosure features a motorized opening. It works in desktop configurations of FSL Muse Pandora.

MOPA fiber laser is a special type of fiber laser that allows for greater control over the pulse width and frequency parameters. This laser can be used to color laser engravings on metals.

Fiber Laser Cutting Machine Tube

Fiber Laser Cutting Machine Tube

We offer different laser power options: 1000W - 1500W - 2000W - 2500W – 3000W - and even 3000W. These fiber laser machine can complete tasks quickly and accurately with a maximum speed of 35m/min. Laguna Tools offers machines with enclosed working areas to prevent light pollution.

The laser source is at the heart of any fiber laser. A fiber laser does not use any gaseous medium like a CO2 one.

Power

It is free to use, and it can be installed on Microsoft Windows XP (or Windows 2000), WIN 7, WIN8, or WIN 10 OS.

Plasma working can be complicated. I'll explain the basics as quickly as possible. Plasma cutters heat up gases so that they can melt metal. After the metal melts, it's blown out with gas. The science behind this is complex, but I'll spare you the details. You can either do some research yourself or ask me.

Power

Lenses

The laser beam is then amplified by a flexible optical fiber, which is fed to the cutting machine.

When buying safety glasses for this machine, make sure to buy one which is designed to block 1064 nm laser light.

Fiber Laser Cutting Machine Installation
Fiber Laser Cutting Machine Aluminum

Fiber lasers only have a narrow focal point so it is difficult to use them for cutting thick materials. A CO2 laser would be the best choice.

MCWlaser PRO does not offer an upgrade, but you can modify it during purchase.

Power

Check our other pages :

Fiber-optic Cables

Fiber lasers are solid state lasers. However, they are very different from diode and fiber lasers. This is because of the difference in their capabilities.

With lasers, as long as you have your cutting parameters set right, you don’t really have to watch them. Laser cutters will do their things like automated robots. Occasionally though, they could go wrong. So, it’s recommended you watch them here and there. Plus, watching laser cutters cut is super awesome anyways.

Frequently Asked Questions

Laser fiber cutting machine

Fiber optic laser cutters are intended to cut metal at high speeds and with pinpoint accuracy. These machines, which have been on the market for more than 20 years, also use a fiber laser power source.

Options for payment The average laser can cost between $50,000 and $250,000, making it a significant asset to a business.

In fact, the diode module in a fiber laser typically outlasts other technologies by three times. Most lasers have a lifespan of about 30,000 hours, which equates to about 15 years of use. Fiber lasers have an expected life of 100,000 hours, which equates to 45 years of use.