Q Switched

Fiber Laser Marking Machine Olx

So you need to use a 30W or 50W fiber laser for upgrading the engraving area to 7.87" x 7.87" or 11.81" x 11.87".

You can also use Photoshop, CorelDRAW and AutoCAD to create advanced designs.

Gulf States Saw & Machine Co., FM1212-50S is able to engrave acrylic.

FM-Desktop mobile engraver machine has a footprint measuring 33.5" x 24,.5" It can mark on 4.33"x4.33" which is great for small projects like laser engraving knives.

Fiber Laser Marking Machine Olx
Beam

Beam

This basically means that when working on materials such as metals which reflect laser beams, fiber laser radiation will absorb at a higher rate than laser generated by CO2 lasers.

Gulf States Saw & Machine Co., provides a warranty of two years for all their fiber laser machines. You will also get a 30-day replacement period when you purchase through Amazon.

Can you laser etch titanium

Plasma science can seem complicated. I'll try to make it as simple and quick as possible. Plasma cutters heat the gas enough to melt it. After the metal has been heated enough to melt, it can be blown with gas to make a cut. There is much more to this process, but that's for another day. (Or, you can conduct your own research, if desired).

They do not offer an official return policy, but you will get a 30-day replacement period when you purchase through Amazon.

Can you laser etch titanium

Laser Classification

This fiber laser can provide a repeatable precision up to +-0.0001" and a beam strength of less than 1 M2.

Raycus 50W laser fiber can etch aluminum at a 90 degree angle and mark it with 100% laser power.

Equipment

Fiber lasers use much less energy than CO2 lasers. They operate at shorter wavelengths (780 nm to 2200 nm) and have a much higher absorption.

Keep all of your production lines flowing in the same direction: out the door and into your customers’ hands.

Can you laser etch titanium

Check our other pages :

How thick can a laser cutter cut

Fiber lasers do not have a large focal point. It is therefore difficult to use them to slice thick materials. A CO2 laser will be the best solution in these situations.

To increase engraving area from 7.87"x7.87", to 11.81"x 11.87", you'll need a 50W or 30W fiber laser.

Frequently Asked Questions

Marking and engraving are improved by high peak power and nanosecond pulses. The increased power and improved beam quality result in cleaner cut edges and faster cutting speeds. Fiber lasers are also used in material processing, telecommunications, spectroscopy, medicine, and directed energy weapons.