Can a fiber laser cut titanium

Fiber Laser Machinery Lens

You can laser engrave stainless-steel dog tags with a 30W fiber light source at a angle of 90 degrees. This laser uses 70% of its power and allows you to work at speeds up of 708 ipm.

Trying to figure out which Fiber Laser cutting machine is right for you? Contact our team to learn more about how our tools can craft anything you have in mind.

Triumph Laser supplies a computer and a rotary axis, foot switches, 200mm lenses, laser goggles, and an assortment of wrenches with the desktop 30W fiber laser.

Boss Laser provides the FM-Desktop laser engraver in three laser configurations, 20W, 30, and 50W. You can pick them depending on what you need.

Fiber Laser Cutting Machine Diy

Fiber Laser Cutting Machine Diy

With the latest in artificial intelligence (AI) and gas reduction technology, the new GX-F ADVANCED Series of two-dimensional fiber lasers delivers more power while using less nitrogen.

Mirror galvanometers can be found in laser engravers. These mirrors move very fast to direct the laser's course. A simple rotation of 10 degrees at your head is sufficient to produce 1 1/2 inches of movement at ten inches. It is also used before engraving and cutting laser paths.

Fiber Laser Machinery Lens

What materials Cannot be laser cut

MCWlaser PRO includes a Z-axis. It can be moved manually with a control knob. Unfortunately, the XY and Z axes can't be adjusted.

The fiber laser is capable of achieving a repetition precision of +-0.0001" while producing a beam quality of less that 1.1 M2.

What materials Cannot be laser cut

Wide Range

Once you have accessed the machine's control through RetinaEngrave version 3.0, you are ready to start your first job. It takes about 30 minutes to complete this task.

Other engraving area options available are 6.9" x 6.9", 5.9" x 5.9", 4.3" x 4.3", and 2.6" x 2.6". You can choose them depending on your operational requirement.

Mopa

Finally, the laser beam will be projected onto the work material and is focused at the cutting head.

Plasma on the other hand can effectively cut any kind of metal up to 80mm thick or 3 inches. Interestingly, plasma can start cutting faster than laser when cutting thicker materials.

What materials Cannot be laser cut

Check our other pages :

Co2 Lasers

MCWlaser PRO features a Z-axis that can be manually moved up or down using a control wheel. Unfortunately, the XY axes cannot be adjusted.

FM-Desktop also offers an option to increase the marking area. It can be extended to 7.87"x7.87", or 11.81x11.87".

Frequently Asked Questions

Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.

To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.
 

What Materials Can Be Cut With A Fiber Laser? A fiber laser cutting machine can cut sheet metal such as carbon steel, stainless steel, copper, brass, aluminum, and titanium. Fiber lasers outperform CO2 lasers in cutting reflective materials.