The quality of operation is defined by the distance between the nozzle and the metal. It should be accurate enough to make sure the result is precise and as per the customer’s requirement. Factors like the intensity of the beam and speed of the laser beam and cutting head also determine the output quality.
Pick the best nozzles for your lens and make sure they are in perfect condition.
A professional laser tube cutting machine cost starts around $50,000 with CNC controller for any types of metal tubing.
After shopping for the parts and accessories you need, the last task is to assemble your kit and debug any software or hardware. Operation and cutting quality of your machine depend on the type of cutting material, laser, gas, pressure, and other parameters. The parameters should be set according to the cutting process. Unsane parameter settings or operations can cause a reduction in cutting effect, damage of the cutting head and other machine parts or even injury.
The refractive lens is the primary component of beam delivery assemblies. It directs the beam in a desired direction. Protective covers are used to cover the reflector. To prevent contamination, a clean, positive pressure protective gas is added.
Make sure you choose the correct nozzles and lenses. Also, inspect them to ensure they are clean and in good condition.
According to your own cutting needs, select a suitable gas, and check whether the jet is in good condition;
According to the material and thickness of the raw material to be cut, adjust the system cutting parameters of the equipment correspondingly;
A cooling unit is a water heater that is used to cool the machine. For example, an electro-optical transformation rate of 33% is used, and approximately 67% is converted into electric energy. To ensure that the equipment runs smoothly, the chiller should be cooled using water.
The Quattro provides the versatility of a production quality laser in a small package. It combines the latest design and development in machine, CNC and laser resonator technologies. The Quattro features a compact design, low operational and maintenance costs, ease of operation, and high performance-per-cost ratio.
The maintenance-free, industrial-grade laser cutting system offers outstanding technical benefits, low power consumption, lower operating costs, repeatable and precise laser positioning performance. This sets new standards for complex pattern cutting and improves process quality inspection.
You should choose suitable lenses and nozzles, and then inspect them to verify their cleanliness.
A CNC controller can be used to control movement of X and Y axes as well as set cutting parameters, such power and speed.
A cooling system is a water chiller that cools the machine. The electro-optical conversion rates are 33% and 67% respectively. Heat energy is converted at about 67%. To ensure normal operation, the chiller must be cooled with water in order to lower the temperature.
Laser cutting is classified into three types: fusion cutting, flame cutting, and remote cutting. An inert gas (typically nitrogen) is used in fusion cutting to expel molten material from the kerf. Nitrogen gas does not exothermically react with molten material and thus contributes no energy to the system.
Laser power of 80W. A laser can typically cut up to 10mm acrylic and up to 9mm soft woods.
'The effect that powerful lasers have on actual flesh varies both with the wavelength, or color, of the light and the duration of the pulses that they produce,' as you might expect. The real discovery of these researchers, however, is that lasers cut flesh by causing a series of overlapping micro-explosions.