According to your own cutting needs, select a suitable gas, and check whether the jet is in good condition;
According to the material and thickness of the raw material to be cut, adjust the system cutting parameters of the equipment correspondingly;
A professional laser tube cutting machine cost starts around $50,000 with CNC controller for any types of metal tubing.
After shopping for the parts and accessories you need, the last task is to assemble your kit and debug any software or hardware. Operation and cutting quality of your machine depend on the type of cutting material, laser, gas, pressure, and other parameters. The parameters should be set according to the cutting process. Unsane parameter settings or operations can cause a reduction in cutting effect, damage of the cutting head and other machine parts or even injury.
To ensure there are no debris, clean the equipment's guide rails and wipe it clean.
The focus tracking system consists of an auto-focus laser head and a tracking system. The cutting head is made up of mechanical adjustment parts and a water cooling system. The sensor is composed of an amplification control piece and a sensing element. There are two types: the inductive sensor tracking system, also known as a contact system, and the capacitive sensor track system, also known as the noncontact system.
The laser resonator is the powerhouse of any laser cutting machine. It consists of a glass tube with two mirrors placed with their faces facing each other. The tube consists of gases like CO2, hydrogen, nitrogen, and helium.
The maintenance-free industrial laser cutting system boasts outstanding technical advantages, ultralow power consumption, reduced operating cost, and repeatable laser positioning performance. It sets a new standard in complex pattern cutting and quality inspection.
The maintenance-free, industrial-grade laser cutting system offers outstanding technical benefits, low power consumption, lower operating costs, repeatable and precise laser positioning performance. This sets new standards for complex pattern cutting and improves process quality inspection.
You should choose suitable lenses and nozzles, and then inspect them to verify their cleanliness.
A CNC controller can be used to control movement of X and Y axes as well as set cutting parameters, such power and speed.
A cooling system is a water chiller that cools the machine. The electro-optical conversion rates are 33% and 67% respectively. Heat energy is converted at about 67%. To ensure normal operation, the chiller must be cooled with water in order to lower the temperature.
The refractive lens is the primary component of beam delivery assemblies. It directs the beam in a desired direction. Protective covers are used to cover the reflector. To prevent contamination, a clean, positive pressure protective gas is added.
Make sure you choose the correct nozzles and lenses. Also, inspect them to ensure they are clean and in good condition.
Laser cutting is classified into three types: fusion cutting, flame cutting, and remote cutting. An inert gas (typically nitrogen) is used in fusion cutting to expel molten material from the kerf. Nitrogen gas does not exothermically react with molten material and thus contributes no energy to the system.
Laser power of 80W. A laser can typically cut up to 10mm acrylic and up to 9mm soft woods.
'The effect that powerful lasers have on actual flesh varies both with the wavelength, or color, of the light and the duration of the pulses that they produce,' as you might expect. The real discovery of these researchers, however, is that lasers cut flesh by causing a series of overlapping micro-explosions.