Adjust the system parameters to cut the material according to its thickness and material.
Staff must be present during the operation to check the equipment and press the brake button if necessary.
There are three main types of laser cutter. CO2 laser cutters use electrically-stimulated CO2, and are typically used for cutting, boring and engraving. This is the most common laser cutter to be used by hobbyists and makers. Crystal laser cutters use nd:YVO and nd:YAG, and are high powered, so they can cut through thicker materials. Fibre Laser Cutters use fibreglass and can work with both metal and non-metal materials.
Fusion Pro's overhead IRIS camera system allows for accurate and simple positioning of graphics. To speed up your job turnaround, you can drag and drop your artwork on your materials.
Select your file at the laser, put your engraving material in the machine, shut the door, and press GO. The laser will do the rest!
The laser cutting system is industrial-grade and maintenance-free. It has exceptional technical advantages, low power consumption and lower operating costs. Laser positioning performance can be repeated and accurately positioned. This establishes new standards in process quality inspection and sets a new benchmark for cutting complex patterns.
All-in-1 sheet metal and tube cutters for sale at prices starting from $42,500 to $1.16,000 for dual-purpose, commercial use with automatic motion.
Laser cutters may be divided into laser metal, laser wood, and laser leather cutters.
Next, press the main switch to turn on the main power of the machine. Turn the key switch on the control panel. This is machine-specific and not relevant to all lasers. If all the covers fixed with safety circuit breakers are closed, the system will start to quote after startup. After turning on the machine, the table will move all the way down while the pro laser head moves to the zero position (located in the upper left corner). When there is a sound and the LED light flashes slowly and steadily, the reference process has been completed correctly and the machine is ready to start operation.
A fiber laser cutting machine can be purchased for between $8,800.00 and $260,000.00. A CO2 laser cutter is available for as low as $2,600.00 up to 68,000. A mixed laser cutting system costs $6,800 to $32,500
Laser beam is a type of light, and like other natural light, it is produced by the transition of atoms (molecules or ions). However, it is different from ordinary light in that the laser depends on spontaneous radiation only for a very short period of time. The subsequent process is completely determined by the excitation radiation, so it has a very pure color, almost no divergence direction, and extremely high luminous intensity, and high coherence.
GSS Machinery's desktop laser system is a great choice for your first laser system. The Zing 16 is a desktop package that combines high-quality components with the best engraving.
A beginner or professional should operate the laser cutting machine under the guidance of the instructions and the safety tips in the user manual to avoid accidents. You must follow the listed safety rules; The operator must consult all the manuals provided with the machine, be familiar with the structure and performance of the equipment, and master the relevant knowledge of the operating system. Wear labor protection equipment as required, and wear protective glasses that meet the regulations near the laser beam. Do not process the material until it is determined whether the material can be irradiated or heated by the laser to avoid the potential danger of fumes and vapors. When the machine is started, the operator shall not leave the post or be managed by the trustee without authorization. Keep the fire extinguisher within easy reach. Turn off the laser or shutter when not working. Do not place paper, cloth or other flammable materials near an unprotected laser beam. If an abnormality is found during the processing, the machine should be stopped immediately, and the fault should be eliminated or reported to the supervisor in time. Keep the laser, bed and surrounding sites clean, orderly and free of oil. Workpieces, plates and scraps are stacked according to regulations. When using gas cylinders, avoid squeezing wires, water pipes and air pipes to avoid leakage of electricity, water and air. The use and transportation of gas cylinders shall comply with gas cylinder regulations. Do not expose gas cylinders to direct sunlight or near heat sources. When opening the bottle valve, the operator must stand on the side of the bottle mouth. Before turning on the power of the chiller, check the water level of the chiller.
The motor ring should be cleaned frequently to ensure the normal operation of the machine and accurate cutting, so as to ensure the cutting quality;
Laser cutting is classified into three types: fusion cutting, flame cutting, and remote cutting. An inert gas (typically nitrogen) is used in fusion cutting to expel molten material from the kerf. Nitrogen gas does not exothermically react with molten material and thus contributes no energy to the system.
Laser power of 80W. A laser can typically cut up to 10mm acrylic and up to 9mm soft woods.
'The effect that powerful lasers have on actual flesh varies both with the wavelength, or color, of the light and the duration of the pulses that they produce,' as you might expect. The real discovery of these researchers, however, is that lasers cut flesh by causing a series of overlapping micro-explosions.