Tube Laser Cutting Systems 24 X 12

Tube Laser Cutting Systems How It Works

You may have noticed that we haven’t discussed cutting speed yet. It is possible to cut up to 500 inches per minute on a tube, but that’s not always realistic. In laser tube cutting, the real focus should be on how long it takes to load a tube, index it so it’s in the right position for cutting, pierce and cut it, and unload the part. It’s more about part-processing time with laser tube cutting machines, not cutting speed.

Another thing to consider is the modular design of the fiber laser. These modules are small enough to be carried in a briefcase and allow for redundancy. The resonator does not completely shut off if one module fails. The fiber laser acts redundantly in that it can produce more power temporarily in order to support the damaged module until repairs can take place. (This can, by the way can be done on the field). Other times, the fiber-resonator can continue producing lower power until repairs can take place. A CO2 resonator issue can lead to the complete resonator being down.

The other factor to keep in mind is that the traditional method of checking for bows and twists in the tube can take up to five or seven seconds before cutting commences. With the traditional means of touch sensing, you have to trade productivity for accuracy. Again, in the age of fiber laser cutting, this can seem like a lifetime, but working with tube is not as simple as working with sheet metal.

Shape laser technology allows complete customization and cutting-to-length capabilities in just a single step. You can make finished or semifinished parts from the raw material.

Tube Laser Cutting Systems How It Works
Tube Lasers Cutting Systems Near Me

Tube Lasers Cutting Systems Near Me

StarCut Tubes SL is a laser cutting system that provides high accuracy, superior reliability, as well as high performance for cutting complicated medical devices such stents.

Fiber solutions for large diameter tubes or profiles Tubes up O14 (355mm)3D-cutting modeFiber laser

Capabilities

Many thought fiber lasers could only be used for thin materials at one time. Due to its longer wavelength, CO2 produced enough kerf for the cutting of thick materials so that there was enough room for material removal. However, the fiber laser wasn't able to produce the same kerf in thicker materials. The problem was solved in recent years by collimating technology which allows for a wider beam of fiber laser-generated light that can be used to create materials separation. Because the beam width can be switched, the machine can use a narrower beam to process thin material. This makes it possible for the machine to process different-sized materials faster on the same fiber laser cutter machine.

NIT's Coherent laser cutting machine is used to vertically produce nitinol, and other metal components. It has exceptional precision and edge quality.

Capabilities

Why has my laser lost power

Their high cutting efficiency is what distinguishes CO2 lasers. Their main area of use is in the medium to large range of materialthicknesses. Laser beam cutting edges excel in throughburr-free and low scoring. This means that cut parts can be further processed without the need to rework.

With laser generating technology, sheet laser cutting machines can now be sold with power outputs up to 12kW. A laser tube-cutting machine usually has a power consumption of 5 kW. Any more power would cause the tube to be cut on both sides simultaneously.

Tube Laser Cutting Systems Operator Salary

You will find the perfect solution for your laser fabrication needs, while still ensuring process quality and efficiency in both metal and nonmetal fabricating.

Gulf States Saw & Machinery Co., Inc. offers tube laser manufacturing capabilities that allow our customers to replace manual processes, and optimize the cutting process.

Capabilities
Cnc Laser Tube Cutting Machine For Sale

Save time and reduce number of components Metal structures and tubular frames can be made faster and more precisely. Completion of your part is possible in just one programming step, one machining step, or on one system.

Parts are held in place with automatic tabbing, done in FabCreator and a set o jaws on each drive chuck or idler chuck.