Laser Pipe Cutting Cnc Machine

Tube Laser Cutting Systems Kolkata

The best solution for tubes with any section. Tubes up-to O 6 (152.4 mm)2D CutCO2 or fiber laser

Cameras are being used by machinery manufacturers to inspect tubes. The quality check takes only about half an second, and the rotations required are reduced. This allows the machine's productivity to be maintained as well as its accuracy.

Perhaps you have noticed that we haven’t yet discussed cutting speed. Although it is possible to cut 500 inches per minute with a tube, this is not always feasible. Laser tube cutting should not be about how long it takes for a tube to be loaded, indexed so that it is in the right place for cutting, pierce it and then unload it. Laser tube cutting machines are more concerned with part-processing times than cutting speed.

Some things can be quite obvious. The fiber laser "generator", as it is called, is smaller than traditional CO2 resonators. The fiber laser is actually created by banks and modules of diodes. They can be assembled into a compact module with a power range of 600 to 1,500 watts. A number of modules are combined to make the final powered receiver, which is often the size of small filing cabinets. The light is amplified and channeled through fiber-optic cabling. The fiber-optic cable transmits the light exactly as it was before. This ensures that there is no loss of quality or power. Then, it is adjusted and focused according to the material being cut.

Tube Laser Cutting Systems Ebay

Tube Laser Cutting Systems Ebay

Some things are very obvious. A fiber laser's laser generator is smaller than a CO2 resonator. The fiber laser is actually made from banks of diodes, which are assembled in a module the size of a briefcase. It can produce power from 600 to 1,500 Watts. The final powered resonator is made up of multiple modules that are connected together. It can be as small as a small filing cabinet. Fiber-optic cable amplifies the light produced and channels it. The light that exits the fiber optic cable is exactly the same as it was when it was generated. There is no loss in power or quality. The light is then focused and adjusted to determine the material that will be cut.

Tube cutting also requires a weld seam. This material is rolled-formed and then welded together. These two points should be considered:

Tube Lasers Cutting Systems Michigan

StarCut Tube L 600 may be purchased with either a fiber, USP or both lasers. StarCut Tube SL Compact Model has the smallest footprint.

The TruLaser Tube 5000 fiber attains record speeds. It maximizes the potential of solid-state lasers. This allows users to have fast processing times and access to many possible parts.

Tube Lasers Cutting Systems Michigan

Material

No need to coordinate multiple orders and vendors. Gulf States Saw & Machinery Co., Inc. can handle everything from material procurement to past delivery.

You can take a look at our StarCut Tube production area and lab to learn more about these multi-axis CNC machines for tubes, flat materials and medical devices like catheter shafts and hypotubes.

Pipes

Lasertubes are our 2D- and 3D laser cutting machines for tubes and bars. Available in sizes from 12 mm - 610 mm (.5" - 24") and lengths up to 18m (60")

Find out how the Coherent StarCut Tube (and StarFiber laser powered cutting machines) helped NPX Medical get a competitive edge in stent manufacturing.

Tube Laser Cutting Systems Kolkata
Tube Lasers Cutting Systems Michigan
Tube Laser Cutting Systems Zing

Let's look below at the advantages of using an automatic tube and section bar storage system with a Lasertube cutting system.

At one time many thought that fiber lasers could be used only for thin materials. The CO2, with its larger wavelength, created enough kerf during the cutting of thick materials that enough space was allowed for material removal; the fiber laser couldn’t produce the same kerf or results with thicker materials. But that has been addressed in recent years with collimating technology that can produce a wider fiber laser-generated beam that creates materials separation and room for material removal in thick materials. And since the beam width is switchable, the machine can use the narrower beam to process thin materials, which allows for faster processing of different-sized materials on the same fiber laser cutting machine.