Market Forces

Tube Lasers Cutting Systems Milwaukee Wi

Motion Dynamics is a leader in the manufacture of neuro-sub-assemblies. This includes steerable catheters, "pull-wire" assemblies and other neurological components. We use our StarCut Tube machines to precisely cut key components.

For large diameter tubes or profiles, CO2 is the best choice. Tubes up O 14/24" (355 mm/ 610mm) 3D cutting modeCO2 laser

The simplest way to enter the tube laser cutting world. Tubes up to Ř 4,72" (120 mm)2D cutFiber laser

A CO2 laser is more efficient than a fiber one because it requires less power to create. This means that large chillers for CO2 lasers will require more overall power. With a wall plug efficiency greater than 40%, the fiber laser resonance uses less power and takes up less space.

Tube Lasers Cutting Systems Quebec

Tube Lasers Cutting Systems Quebec

Every job shop has to have variety. Parts of different sizes may be obtained from the same tube. The machine must have the ability to load laser-cut parts, which can be as small at 2 inches. each other for a total length of 15 ft. It should also be able to load those parts without damaging them. This can sometimes be a problem with softer metals like aluminum.

Laser tube cutting systems are our 2D and 3D laser cutting systems for tubes, bars and profiles, from 12 mm to 610 mm (.5” to 24") in diameter and up to 18 m (60') in length.

Tube Lasers Cutting Systems Milwaukee Wi

Barcode

Fiber solution for large-diameter tubes and profiles Tubes up O14" (355mm) 3D cutting modeFiber laser

Tubes are fundamental building blocks for any type of manufacturing, including equipment for gyms and smaller multifunctional machines for homes. This is why many tube processing technologies like laser cutting or bending are so popular in this sector.

Barcode

Tube Laser Cutting System 6.3.761.9

Fiber lasers have a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 laser beam. With its much smaller wavelength, the fiber laser produces a beam that is much more easily absorbed by the reflective material; a CO2 laser is much more likely to reflect off the surface of these materials. Because of this, fiber laser cutting machines can cut brass, copper, and other reflective materials. It should be noted that a CO2 laser beam that reflects off the material can not only damage the machine’s cutting lens, but also the entire beam path. Using a fiber-optic cable for the beam path removes this risk.

Monaco high-power, femtosecond-lasers offer superior edge quality for micromachining and improved scientific applications such as three-photon microscopy.

Technology

Your in-house laser tube cutting doesn't need to be expensive or complicated anymore. Anyone from students to engineers can cut like never before

Tube and sheet metal cutting by a combined laser system. Tubes up O 4.72", 120 mm. Sheets up 236". x 79". (6000mm x 2000mm).Fiber Laser

Barcode
Laser Tube

How can you compensate? Traditionally, you would touch the contact points by coming down. Next, rotate the tube and touch the opposite side. This will give the control an indication about how bent the tube may be. This can be used to ensure that through-holes fit the application. Be aware that this reduces your ability to deliver very precise tolerances every time the tube rotates.

With a laser tube-cutting machine, there are no standard towers. Bundle loads are the most efficient method for handling tubes. These loaders feed one tube per bundle into the tube cutter via a singularizing mechanism. This feeding method is not compatible with open profiles such as angles or channels. Because they interlock within a bundle, and don't allow for easy release, this type of feeding doesn't work. Step loaders are employed for open profiles. These machines sequence one section at a time and maintain the correct orientation.