Beam

Tube Laser Cutting Systems Jewelry

Record speeds are achieved by the TruLaser Tube 5000 fiber. This fiber takes full advantage the solid-state laser's strengths. This means that the user can process quickly and have access to a large number of parts.

You may have noticed we haven’t covered cutting speed. Although you can cut up 500 inches per minute using a tube cutter, it's not always practical. Laser tube cutting involves focusing on the time required to load a tube, index the tube so it's in a good position for cutting and then pierce, cut and unload the part. It is not about cutting speed, but part-processing time when laser tube cutting machines are used.

The fully-automatic solution that guarantees maximum productivity and fast production changes.Tube Ø Range min. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser

Let's take a look at the benefits of an automated tube and section bar storage with a Lasertube cutter system.

Tube Lasers Cutting Systems Miami

Tube Lasers Cutting Systems Miami

Use Coherent laser systems to cut, weld, drill, texturize, and mark medical devices for precision manufacturing.

StarFeed can be used as an automated loader/unloader to the StarCut Tube laser cutting machine. It comes in two sizes, S and L. The StarFeed allows you to fully automate dry and wet cutting for tubes of any diameter from 1-20mm. StarFeed L can store 48 tubes and allows processing of oval tubing. Its sensor-controlled gripping unit avoids damage. The result is a substantial increase in productivity.

Tube Lasers Cutting Systems Usa

Tubes are the basic building blocks of any equipment, no matter how small or multifunctional they may be for home use. This is why tubes are used so extensively in this sector, including laser cutting and bending.

The StarFeed is an automated loader/unloader for the StarCut Tube laser cutting machine and is available in sizes S and L. This combination allows fully automated dry or wet cutting of tubes from 1-20 mm diameter. The StarFeed L stores up to 48 tubes and even allows the processing of oval tubes. Its sensor-controlled gripping unit avoids damage. The end result is a big increase in productivity.

Tube Laser Cutting Systems Jewelry
Tube Lasers Cutting Systems Usa

Tube Lasers Cutting Systems Ky

Laser systems are available for electronics manufacturing. They can perform cutting, welding marking, marking, and ablation with high precision.

Tubes, profiles and systems are everywhere. They're used for everything from mechanical engineering to system construction to furniture making. With the new possibilities that lasers present, designers are increasingly taking advantage of laser-cut tubes or profiles. This has led to a substantial increase in demand. TruLaser Tube machines are a complete solution for laser tube cutting.

Tube Laser Cutter

All types and all shapes: This 3-dimensional cutting machine cuts carbon, aluminum, stainless, and red metals. It is available in round, rectangular, irregular and square shapes.

There are two options for laser cutting technology: 2D or 3-D. You can customize and cut parts in many different shapes. For example, you can make tubes that have round, square and rectangular shapes. Also, you can cut profiles with various open cross-sections like H, L, T and Ucross-sections. 3D technology can also be used to make bevel cuts as high as 45degrees. This versatility makes it possible to eliminate the need for expensive milling, drilling and punching as well as sawing.

Tube Lasers Cutting Systems Usa
Tube Laser Cutting Systems Repair Service

High cutting quality is one of the main characteristics of CO2 Lasers. Their primary application is in medium to high material thicknesses. The laser beam's cutting edges offer high throughburr and low scoring. This makes it possible to process the cut parts further without having to rework.

Many believed fiber lasers could only work with thin materials. Because CO2 has a longer wavelength, it created enough material kerf to permit material removal. Fiber lasers can't produce the same level of kerf and results with thicker materials. This has been corrected by collimating tech, which can produce a wide fiber laser-generated beam that allows for materials separation. It also makes it possible to allow for material removal in thicker materials. You can also switch the beam width so that the machine can process thin materials with the narrower beam. This allows you to process more materials in a shorter time.