You will be able to see the fiber laser in action for a better understanding of some things. A fiber laser has a higher power density than a CO2 beam because its beam diameter is usually one-third of that of a CO2 beam. This allows the fiber to cut faster and pierce more quickly. The fiber can also cut intricate shapes and leave sharp edges thanks to the smaller beam size. A fiber laser can cut a logo for a company out of a tube with a spacing of 0.035 inches between letters.
Gulf States Saw & Machinery Co., Inc. can provide a variety of fabrication solutions for processing tubes, pipes, or structural steel. The tube lasers of Gulf States Saw & Machinery Co., Inc. offer superior laser-cutting technology, but many include additional processing functions that provide value-added benefits to fabricators.
Motion Dynamics is a major manufacturer of neurological sub-assemblies. They include steerable catheters as well as "pull wire" assemblies. Our StarCut Tube machines are used to precision cut key components.
Large diameter profiles and tubes can be made with the fiber solution. Tubes up O 14 inches (355 mm).3D cutting modeFiber Laser
Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.
Reduce secondary operations: A tube-laser can cut a piece to size and add holes and other cutouts in one step. It eliminates the need to perform secondary actions or manually remove material. It is possible to keep tight tolerances even on complex fabrications. Parts can be made from one continuous piece. They are easy to put together and fit perfectly. We can also tube laser carbon, stainless steel, and aluminum.
The CO2 reactor is larger and consumes more energy. To produce the laser beam, electricity is added to a mixture gas mixture. Mirrors are used to increase the intensity of light, and prepare it for exiting a resonator. The beam must travel through the path of several cooled reflectors until it reaches lens once it has left the resonance. This travel can cause a loss of power or quality in the laser beam.
StarFiber Series combines compact fiber lasers with optional cutting heads or focusing heads for laser welding and cutting. SmartWeld(tm), which allows for fine and broad welds, is also available.
Find laser systems for electronics production that can perform high-precision, fast cutting, welding, marking and ablation of metals or plastics.
Some things can be quite obvious. The fiber laser "generator", as it is called, is smaller than traditional CO2 resonators. The fiber laser is actually created by banks and modules of diodes. They can be assembled into a compact module with a power range of 600 to 1,500 watts. A number of modules are combined to make the final powered receiver, which is often the size of small filing cabinets. The light is amplified and channeled through fiber-optic cabling. The fiber-optic cable transmits the light exactly as it was before. This ensures that there is no loss of quality or power. Then, it is adjusted and focused according to the material being cut.
Tubes and profiles are used everywhere – from mechanical engineering and system construction all the way to the furniture industry. Lasers have opened up new design possibilities, so more and more designers are taking advantage of the benefits of laser-cut tubes and profiles thereby considerably increasing demand. Discover all-round solutions for the world of laser tube cutting and find out more about the TruLaser Tube machines.
StarCut Tube SL combines an fs-laser to create complex metal shapes.
Let's examine the benefits of using an automated tube storage system and section bar storage system in conjunction with a Lasertube-cutting system.
Lasertube systems are 2D and 3-D laser cutting systems that can be used to cut tubes, bars, and profiles. They come in a range of sizes, including 12 mm to 661 mm (.5"-.24") in diameter, and up to 18m (60' in length).
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.