StarCut Tube is a tube-cutting laser machine that offers precision up to +/- 5um.
PowerLine C is a CO2 laser-based system for precision drilling, cutting and scribing of many non-metals including glass and organic materials.
A laser tube cutter machine does not come with standard material towers. Bundle loaders are the most efficient option for tube material handling. They feed one tube from each bundle to the tube laser through a singularizing device. This type of feeding mechanism is not suitable for open profiles such as channels or angles, since they are interlocked while inside a bundle and can't be released easily. Step loaders are used for open profiles. They sequence each section into the machine one at a while maintaining the correct orientation.
Tubes, profiles and systems are everywhere. They're used for everything from mechanical engineering to system construction to furniture making. With the new possibilities that lasers present, designers are increasingly taking advantage of laser-cut tubes or profiles. This has led to a substantial increase in demand. TruLaser Tube machines are a complete solution for laser tube cutting.
The tube cutting laser machine StarCut Tube offers the ultimate precision, with contour cutting accuracies better than +/- 5µm.
Parts can be held with automatic tabbering (in FabCreator), as well as a set of jaws at the drive chuck, and the idler-chuck.
All types, any shapes: This three dimensional cutting machine can cut carbon steel, aluminum, red metals, and stainless steel in any round, square or rectangular shape.
Eliminate secondary operations: A tube laser can cut a piece to length and add holes and other cutout designs in a single step, eliminating the need for secondary actions and manual material removal. You gain the ability to hold tight tolerances on more complex fabrications. Parts can be produced from one continuous piece of raw material to ensure that they only fit one way and are easily assembled. We can tube laser aluminum, stainless steel and carbon.
Our system solutions have the most flexible selection available for small and large-scale production. They are available in diameters of 10 to 324 mm and lengths of pipe and profiles up to 12.5 m.
The fiber solution for large diameter tubes and profiles.Tubes up to Ø 14" (355 mm)3D cutting modeFiber laser
ExactCut 430, a laser cutting machine for precision processing of thin and large metals and all alloys, brittle material like sapphire or PCD, is available.
This fully-automatic solution guarantees maximum productivity as well as rapid production changes. Tube O Range min. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser
Secondary operations can be eliminated: A tube laser can easily cut a piece of material to the desired length, add holes or other cutout designs in one step. This eliminates the need for manual material removal. This allows you to maintain tight tolerances for more complicated fabrications. You can make parts from one continuous piece. This allows you to ensure they fit in one direction and is easy to assemble. Tube laser aluminum, carbon and stainless steel can all be tubed.
With a rock-solid cutting platform (the SL uses a mineral cast base) these machines offer the ultimate in precision, with contour cutting accuracies better than +/- 5 µm. A choice of fiber laser or the latest Monaco USP laser enables fine cutting of any polymer or metal.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.