Many of Gulf States Saw & Machinery Co., Inc.’s tube laser-cutting system integrate intelligent functions such as monitoring, setting up, and cutting. These automated functions increase machine efficiency and ease-of-use. The wide range of capabilities offered by Gulf States Saw & Machinery Co., Inc.’s tube and pipeline lasers make these machines suitable for many industries and a variety if applications.

Combination laser system for tube- and sheet metal cutting. Tubes upto O4.72" (120mm).Sheets from 236" x79" (6000mmx2000mm)Fiber Laser

This is the tube laser cutting solution that offers the most versatility. Tubes up to O9.45" (240mm)3D Cutting modeCO2 or Fiber Laser

The Coherent StarCut Tube hybrid version offers the best flexibility to cut different medical devices in metals and plastics from flat stock or tubes. This compact, turnkey laser machine combines two lasers into one compact housing.

Tube Laser Cutting Systems Yarn

The CO2 resonance is larger and requires more power as electricity is used to heat a mixture of gases to produce the laser beam. Mirrors increase the intensity of the light and prepare it to leave the resonator. After leaving the resonator the beam must travel through a path made up of several cooled lenses until it reaches its destination. This travel results in a loss in power and quality for the laser beam.

Many of Gulf States Saw & Machinery Co., Inc.'s tube-laser-cutting systems incorporate intelligent machine functions, such as intelligent monitoring, setup, cutting, and other functions. These automated functions make it easier to operate and increase machine efficiency. These lasers are versatile and can be used in many industries.

Tube Laser Cutting Systems Yarn
Tube Laser Cutting Systems Kolkata

Tube Laser Cutting Systems Kolkata

Laser system that combines sheet and tube metal cutting. Tubes upto O 4.72" (120mm).Sheets upto 236"x79" (6000mm x 2000mm)Fiber Laser

Some things are quite noticeable. The laser “generator” on a fiber laser is much smaller when compared to a traditional CO2 resonator. In fact, the fiber laser is created by banks of diodes that are put together in a briefcase-size module that can range in power from 600 to 1,500 watts. Multiple modules are spliced together to create the final powered resonator, which is typically the size of a small filing cabinet. The light generated is channeled and amplified through fiber-optic cable. When the light exits the fiber-optic cable, it is the same that is was upon being generated with no loss of power or quality. It is then adjusted and focused for the type of material to be cut.

Tube Laser Cutting Systems Wiki

Tubes are very simple and do not require a powerful laser. Tube laser cutting machines require only 5 kW power, whereas flat sheet laser cutters can be powered by laser generators up to 12 kW. When cutting a tube, it is important to always think about the other side. A stronger laser would simply blow through the tube on the opposite side during cutting. You don't need to worry about the other side if you're processing a beam of a channel or a channel using the tube laser.

Learn how the Coherent StarCut Tube and StarFiber laser-powered cutting machines helped NPX Medical gain a competitive edge in stent manufacturing and more.

Tube Laser Cutting Systems Zing
Tube Laser Cutting Systems Zing

StarFeed is an automated unloader/loader for StarCut Tube laser cutters. It is available in two sizes: S and L. These combination options allow fully automated dry and wet cutting of tubes up to 20 mm diameter. StarFeed L can store up to 48 tubes, and it even supports the processing of oval tubes. Its sensor-controlled gripping unit avoids damage. This results in a significant increase in productivity.

A weld-seam is an additional consideration when cutting tube. This material can be roll-formed and welded together. This raises two issues that must be addressed.

Trumpf

Metal fabricators know a lot about what flat sheet processing has involved with fiber laser cutting technology. But, what does the fiber laser do for tube cutting? A lot actually.

This is the most effective solution to any tube section. Tubes upto O6" (152.4 mm).2D cutterCO2 or fibre laser

Frequently Asked Questions

Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.