The fully-automatic solution for maximum productivity, fast production changes and high quality. Tube O Range min. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser

A CO2 laser is more efficient than a fiber one because it requires less power to create. This means that large chillers for CO2 lasers will require more overall power. With a wall plug efficiency greater than 40%, the fiber laser resonance uses less power and takes up less space.

The most important criteria for the construction of fitness equipment are design, durability, usability, and compactness.

Fully automated solution that guarantees maximum productivity while allowing for rapid production changes. Tube O Range minimum. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser

Tube Laser Cutting Systems K40

StarFeed is an automatic loader/unloader that is compatible with the StarCut Tube laser cutting machine. Available in sizes S and S, this combination allows for automated dry or wet cut of tubes from 1-200 mm in diameter. StarFeed L is capable of storing up to 48 tubes. Its sensor-controlled gripping unit avoids damage. The result is a large increase in productivity.

Imagine that you have to position a through-hole on top of a tube. It must be centered on the tube's actual dimension. It will be more difficult to center the tube if it is bent. This is the reality of tube fabrication.

Tube Laser Cutting Systems K40
Tube Lasers Cutting Systems Jobs

Tube Lasers Cutting Systems Jobs

Micrometric Ltd's versatile Coherent StarCut tube laser cutting machine delivers speed and precision to medical and aerospace products.

A fiber laser's operation can reveal some subtleties that are not obvious. The fiber laser beam has a much higher power density than the CO2 laser beam due to its smaller beam diameter. This not only allows the fiber laser to cut faster but also allows it to pierce quicker. The fiber is able to cut complex shapes and leave sharp edges because of the smaller beam size. Imagine cutting out a company logo from a tube, with letters spaced at 0.035 inches. A fiber can do that while a CO2 laser cannot.

Tube Laser Cutter

What can you do to compensate? You will traditionally touch your face with a sensor to mark the contact point. The tube is then turned and touched on the other side. This gives the control an indication of how bent the tube is. This is a reliable method that can guarantee the through-holes are working for the application. However, this method reduces the ability to deliver extremely high tolerances for each rotation of the tube.

Some machinery manufacturers use cameras to check tubes. This is done in an effort to close the time gap. Cameras reduce the time required to check quality and reduce the number rotations. This ensures that the machine can retain its productivity and accuracy.

Tube Lasers Cutting Systems
Tube Lasers Cutting Systems

Save time and reduce the number of components.Make tubular frames and metal structures that are more precise and faster to assemble.Complete your part in one programming step, in one machining step, and on one system.

PowerLineC CO2 laser-based systems that can precision drill, cut, scribing mark, and emboss many non-metals like glass and organic material.

Design Software

Metal fabricators know a lot about what flat sheet processing has involved with fiber laser cutting technology. But, what does the fiber laser do for tube cutting? A lot actually.

This is the most effective solution to any tube section. Tubes upto O6" (152.4 mm).2D cutterCO2 or fibre laser

Frequently Asked Questions

Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.