How To Become A Sidemount Technical Scuba Diver Buyer

How To Become A Sidemount Technical Scuba Diver Rider

For dives deeper than 56m gas mixes called Trimix are used. In order to reduce narcosis and reduce the toxic effects of Nitrogen and Oxygen, Helium is added which has no negative effect on our body to very deep depth. There are additional risks with helium but those start at depths of around 180m. In history tests have been executed with different noble gasses, however they all turned out to be toxic for the human body, so helium was the only one adequate for diving. One other gas that has no effect on the human body is Hydrogen but due to its high risk of fire and explosion in contact with oxygen, the blending of it is very difficult if not almost impossible with the techniques we use currently.

New gear means new techniques. Scuba diving sidemount is easy if you have the right skills.

The technical sidemount was completed the next day. This involved adding our 50-percent oxygen tank and 100 percent oxygen tanks to either side. This will increase your profile underwater. You must ensure that the tanks are as slim as possible. A couple of clips are located on either side of your waist. When your tanks become positively buoyant and you inhale, adjust the clip to match your tank position. It is important to keep your breathing as smooth as possible. Your breathing will change from one tank to another every few minutes. The pressure in each tank will drop at approximately the same rate. If a regulator or tank fails, you will still have gas to breath. Comfort and enjoyment can only be achieved by gaining experience. I spent the next few day doing deco dives using the sidemount rig with Evolution co-owner David Joyce, a Trimix instructor and Tec diver. We visited the Japanese Mogami wreck at 164ft, where I was charmed by the pieces of old gas masks and uniforms.

On top of this specialized Sidemount equipment, you will also need your usual wetsuit, fins, mask, computer, compass, and DSMB.

How To Become A Sidemount Technical Scuba Diver 80

The sidemount rig was originally invented for cave diving as it allows the diver to pass thru cracks and restrictions (tiny holes) easier than the classic back mount rig.

Your Sidemount rig also includes clips and tank bands. These clips will attach to your harness. Again, their location is crucial for the positioning of your tanks.

How To Become A Sidemount Technical Scuba Diver Buyer
How To Become A Sidemount Technical Scuba Diver 80
Padi Sidemount Course Cost

Padi Sidemount Course Cost

Technical divers search for wrecks and reefs in depths below the recreational limit (40 m/130 ft). These divers have the ability to dive into underwater caves and other areas not accessible by regular recreational diving.

In addition, your Sidemount rig includes tank bands, clips, and probably some more bungees to stow away your regs nicely. The clips will be connected to your harness and again, their position is important for the position of your tanks.

How To Become A Sidemount Technical Scuba Diver Reddit

And then there are the rebreathers…a rebreather is a machine that recycles exhaled gas and is the preferred method for ‘very’ deep dives in order to use the gas carried more efficiently. In this case the exhaled gas is going thru a canister filled with a chemical which is called Sofnolime or scrubber to remove CO2 from the breathing loop and the remaining gas will be inhaled again by the diver. Metabolised oxygen is replaced into the loop to keep the oxygen content in the divers’ body at the desired pressure.

JavaScript is used in our contact form. It means that in order to fill our contact form, you must activate JavaScript or temporarily deactivate any add-blocker(we don't have adds).

How do people stay underwater longer in the forest
How do people stay underwater longer in the forest

I took my first sidemount and technical sidesmount courses. Sidemount diving, like the name implies, requires you to place your tank on your hands. My hands and knuckles were completely covered by cuts at the end. The idea behind sidemount diving is to unclip your tanks and then place them in front you, Superman style. This will streamline your workflow. After making some adjustments to my harness size, the afternoon dive went more smoothly. I was now comfortable unclipping my harness and "Superman-ing” with the tanks. Sidemount gives you an amazing level of freedom, even if you have doubles on your back. Matt put up obstacle courses. We were soon flying through them with tanks in front, barrel-rolling, swimming upside down and tanks at the rear.

Sidemount divers tend to use two tanks. You can, however, use just one tank (I believe it's called the'monkey'), or use more than two tanks when doing deco dives.

How To Become A Sidemount Technical Scuba Diver Job Description

My first pool sessions were difficult. I felt like an open-water diver once more, strapped into twin tanks and trying valve drills. The Tec 40 and 45 courses were difficult at first, but I soon found that new skills became natural and I enjoyed the course. The joy of Tec diving lies in taking your diving skills, buoyancy, and awareness to the next level. The feeling of knowing that you are capable of handling life-threatening situations at depth and without needing to descend to the surface (dues to decompression requirements) can be quite satisfying. It's satisfying to execute your dive plans with military precision.

There are several more agencies that provide technical diver training which are more region specific. In general the recommendation is to find a reputable instructor, look for recommendations from trusted sources and choose your instructor accordingly. Trust and comfort during the course are invaluable and will help you to feel confident and comfortable to push your boundaries and gain the knowledge you need to go beyond your current certification level.

Check our other pages :

Frequently Asked Questions

According to experts, approximately 40% of technical divers enroll in additional education and training programs. This yields a reasonable estimate of approximately 160,000 active technical divers worldwide.

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

Have a PADI Deep Specialty Instructor certification or have completed a PADI Deep Specialty Instructor course. Have at least 100 logged dives, including at least 20 enriched air dives, 25 dives deeper than 18 meters/60 feet, and 15 dives deeper than 30 meters/100 feet. You can become a Tec 45 diver.