How To Become A Sidemount Technical Scuba Diver Job Description

How To Become A Sidemount Technical Scuba Diver Certification

Your Sidemount BCD harness is made up of a bladder, sliding D-rings and bungee cords. Your tank position and trim will depend on their fit. Your instructor may spend a lot of time getting them right.

The entry-level tech diver will be trained to optimize their equipment to reduce drag and avoid dangling gear. This will ensure a maximum profile for efficient propulsion, awareness and propulsion.

Sidemount diving was originally developed in cave diving. However, it has now made its way into recreational non-overhead diving. Simply put, sidemount diving means that you no longer wear one or two tanks on your back. Instead, you wear your tanks on either your side. The tanks can be attached to a Sidemount BCD with clips and/orbungee cords. This gives you great flexibility. Cave divers were able to use this flexibility to allow them to transport their tanks underwater and fit into tight spaces.

Sidemount is a great option for cave diving, as it can offer many benefits to divers. Sidemount was invented by cave divers. These are just a few of the many benefits.

Sidemount Scuba Training

Sidemount diving provides an independent air source. Two tanks are used, each with their own regulators and first stage, SPG. This makes it much safer and gives little air-hogs (like me) a lot more oxygen. Sidemount's tanks can be easily accessed from the surface. There is no pressure on the back.

Mindfulness - Technical diving can still be fun. Technical diving is all about seeing cool things. However, technical divers can see more than sport divers and are able to see deeper, further, and in places that are not visible to sport divers. Technical divers can still be fun, but they are also very focused. While jokes are still allowed, there is no denying that laughter can be had. However, it is important to be serious about dive planning and execution. There are risks to diving. Those risks increase if you don't plan well, practice your skills and execute properly.

How To Become A Sidemount Technical Scuba Diver Job Description
Sidemount Scuba Training
Diver

Diver

Due to the issues with single-orifice doubles or backmounted independents (which are not as common in modern diving), backmounted doubles were invented. Independents are two independent cylinders attached to one's back, with independent regulators for each. One cylinder was sufficient to take care of a failed 1st Stage. Single orifice duplicates were two cylinders linked with a valve and one regulator. A single orifice doubles set would cause all gas to be lost if a first stage fails. These problems can be eliminated with the modern isolated manifolds. Each cylinder can work independently but divers can also inhale gas from both of them through one regulator. These doubles are typically held together with metal bands. The valves can also be linked with an isolation device, which allows them to be seperated if required. Backmounted doubles diving offers a profile that's vertically identical to regular single-cylinder backmount.

Tec 40 is the first step to start the TecRec program with Padi. The prerequisites are Advanced Open Water and Deep Diver certifications as well as Nitrox. In addition to that, before starting the course a minimum of 10 Nitrox dives have to be proved. The certification allows divers to dive to 40m doing limited decompression using gas mixes up to 50% of oxygen. The Tec 40 is also the prerequisite to continue with Padi Tec 45 which allows to do unlimited decompression time as long as it is carefully planned. The next step will be Tec 50 that enhances the allowable depth to 50m.

Specialty Course

Each PADI Specialty you complete gets you one step closer to earning the elite Master Scuba Diver™ rating.

Gear - Although the gear is the same, divers who are enrolled in an introductory tech class (Intro Tech, Sidemount, or CCR Air Diluent) will notice fundamental differences in the configuration. Instead of having 2 second stages per cylinder, they are split into two with each stage having a separate first. The gas planning process becomes more detailed and the harnesses have more chrome.

How many times can you scuba dive in one day
How many times can you scuba dive in one day

You might consider continuing to Tec Sidemount Diver, where you will learn additional skills that are specific to tec diving in sidemount like switching deco cylinders and staging.

Sidemount and technical sidemount were my first courses. Sidemount diving is, as its name implies, where you place your tank in front of you. By the end of the session, my hands were covered with cuts. You can remove the tanks from their clips and place them in front of yourself, Superman-style, to streamline your life. The afternoon dive went much smoother after some adjustments to the harness. I was now comfortable unclipping the harness and 'Superman-ing" with the tanks. Sidemount is a great way to have more freedom than having two people on your back. Matt created obstacle courses, and soon we were flying around them with tanks at our fronts, barrel-rolling, and swimming upside down.

How To Become A Sidemount Technical Scuba Diver 90

In addition to the Sidemount equipment, you will need your regular wetsuit and fins.

Your Sidemount BCD is a harness with a bladder and a somewhat intricate system of sliding D-rings, bungee cords, and clips. Their position and fit are crucial for your tank position and trim later in the water and your instructor will probably spend quite a bit of time to get them just right.

Check our other pages :

Frequently Asked Questions

2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).