1. Your personal informations (name, email, etc). 2. Pick your prefered date. 3. You can ask question/inquire then just Submit.
The shift from backmounted doubles into sidemount has been one of the biggest changes in the equipment that cave divers have used since the turn of the century. A large number of cave divers sidemount. Additionally, there may be more sidemount cave divers than open-circuit backmount cave divers.
You should know what you are getting. Prices include instruction fees and eLearning fees. Keep in mind that eLearning can cost anywhere from $140 up to $280. If you pay for elearning separately, then a course costing $640 from us could be the same price as a course costing $500 from another source.
Sidemount diving is a great way to get additional air. There are two tanks that you use, one tank with an SPG and the other with regulators. This makes it safer and gives air-hogs like me a lot more air. Sidemount also makes diving extremely easy, since you can simply put tanks on top and there isn't any pressure on your spine.
Sidemount can be a boon for all divers, but it's especially useful for cave diving. (It was actually cave divers that invented sidemount. These are some of the benefits:
Specific skills - The tech programs teach specific dive skills that are required for each category of diving. Navigation and line skills for overhead diving are practiced until they become automatic. Without blinking an eye, decompression divers are able to plan and execute gas management stops and stops. To ensure the equipment's perfect functionality, rebreather divers carefully build, test, and disassemble their equipment. Each course is covered in the initial level of certification. From there, you can move up to the next level. Each level of certification takes these skills deeper and makes them more challenging. This helps divers become well-rounded, knowledgeable and well-prepared.
Sidemount SkillsApart from the Sidemount equipment you will need your normal wetsuit, fins mask, computer, compass, DSMB, and other accessories.
Cave passages that have been formed through millions of years of erosion are only available to those who are certified in overhead diving. They stretch thousands upon thousands of feet. The incredible time span in which these caves were created is a testament to their unique beauty and tranquility.
Sidemount cylinder mounting was first used for cave diving. It has since become more popular in technical diving. They take the dual cylinders apart, one for each, and place them on either side. The diver can't breathe from either cylinder if the regulator fails, but this allows for easier access to valves. Sidemount diving gives the diver an increased horizontal profile and a smaller vertical profile.
Sidemount Diver Specialty may count towards your Advanced Open Water Diver certification. Ask your instructor for details.
So if you want to dive sidemount, especially if you are already a tec diver, you need to learn your new rig, how to adjust it, how to enter into the water with it (yes it is very different, more relax too, though), and so much more.
Because of the difficulties with single orifice doubles and backmounted independents, doubles were introduced to backmounted diving. Independents are two cylinders that are strapped to one's chest with separate regulators. A 1st stage failure would result in only one cylinder being used by the diver. A single orifice double was two cylinders connected together by a valve and one regulator. All gas would be lost if the first stage of a single orifice twice set failed. Today, both problems are eliminated by the isolated manifold doubles. Each cylinder can be operated independently. However, the diver can still inhale gas from both cylinders using one regulator. The doubles are usually held together by metal bands. The valves are connected with an isolation manifold so they can be separated if necessary. Doubles diving with backmounted doubles is similar to a regular single-cylinder backmount. It offers a vertical profile that is the same.
To register for the PADI Advanced Rebreather Diver course, you must first: You must be a PADI Open Water Diver, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.
from 170 to 350 feet
While conventional scuba diving has a recommended maximum depth of 130 feet, technical divers may work at depths ranging from 170 feet to 350 feet, and sometimes even deeper.
To begin a technical diving course, you must have completed the following prerequisites: a PADI Advanced Open Water Diver certificate or equivalent, a PADI Enriched Air Diver certificate or equivalent, and a PADI Deep Diver certificate or proof of at least 10 dives to 30 metres/100 feet.