And of course, the book of Verna Van Schaik ‘Fatally Flawed – The Quest to be Deepest’, the one woman who succeeded to break the female world record in depth in Bushman’s hole in South Africa and how she god there.
Sidemount diving is a great option, especially for those who are already tec divers. You will need to learn how to adjust your rig, how you can enter the water with it (yes, it is different, but it is more relaxed).
While technical diving is still fun, it's not for people who wish to go deeper. Cave and decompression dives carry more risk. The best way to reduce the risk is to plan your dives and train well. This is why divers who take these dives must be held to a higher standard. It takes practice to become a competent diver. There is no substitute for the practice and time in the water. Divers will be able to see that the minimum standards are frequently exceeded during training courses. Individual technical instructors sometimes do this. Technical training teaches divers how to redundancy. It enables them to solve problems at 1500 feet inside a cave. It's not easy and it's scary, but it's an important aspect of diving within that environment. Technical training can be challenging, but it can also be fun. At the end of it, the diver will have the ability to see areas that are completely closed off to the rest of the world.
Our contact form uses javaScript. It means you can fill out our contact page. You need JavaScript to activate in your browser.
Sidemount Diver was by far the most challenging course I have ever taken. However, my instructor Fiona at Big Blue Tech (a trusted dive center) and Big Blue Tech (my instructor) included a lot of skills and dives in my course. We made sure to keep my task load manageable and practiced many skills including tank removal underwater, mask and tank replacement, out of the air drills, and many others while trying to stay in top trim.
Divers who are comfortable with sidemount diving can also enjoy open-water dives. Why? Because sidemount diving is very easy and comfortable.
How To Become A Sidemount Technical Scuba Diver LogComputer-assisted instruction is an integral part almost every course that we teach. The Why? The answer is simple: eLearning makes it easier for students to get in the water quicker and spend more time there. That's why we offer all applicable eLearning courses -- which are usually $140 worth -- at no extra cost. This means that you will get an extra day of training in the water. How valuable is that? Priceless.
Sidemount diving originates in cave diving and has since made its way into recreational, non-overhead dives. Simply put, you'll wear your tanks on the side of your body instead of one or two tanks strapped to your back. The tanks attach to the Sidemount BCD with clips and/or long bungee strings, giving you great flexibility. This flexibility allowed cave divers to get their tanks off the surface to make it fit through narrow spaces.
Sidemount diving stems from the cave diving world but has also found its way into the recreational, non-overhead diving world in recent years.Simply put: instead of wearing one or two tanks mounted on your back, you will wear your tanks on your side. The tanks are attached to a Sidemount BCD with clips and/or bungee cords allowing for great flexibility. Initially, it was this flexibility that allowed cave divers to take their tanks off underwater to fit through narrow spaces as well as making their overall profile smaller.
Divers must maintain a minimum level fitness and health. Some conditions such as chronic illness, recent surgery or medication may make it necessary to obtain written permission before you can dive.
Technical diving means that a diver is not allowed to reach the surface from any point during the dive. It could be due to a ceiling in the form of a cave/wreck or virtual ceilings created by decompression obligations. To avoid decompression sickness, you must perform mandatory stops on ascent when the NDL's are exceeded. This usually requires the use special equipment like Sidemounts and Twinsets. Twinsets and Sidemounts require special gas mixes, additional training, and twinsets/sidemounts to ensure that you can perform these stops correctly on ascent in order to maximize Nitrogen offgassing.
Technical diving refers to being exposed to a ceiling which prevents divers from reaching the surface at all times. This could be caused either by a physical ceiling such as a cave or wreck or a virtual one created by a dive restriction. If the NDL is exceeded, mandatory decompression stops must be made on ascent to avoid any decompression sickness. Most cases require special equipment, such as Sidemounts or Twinsets. To optimize Nitrogen offgassing, Twinsets or Sidemounts are necessary.
Our CDS Basics Orientation course is the best option if you don't plan to use sidemount while you cave diver training.
Sidemount rigs were initially designed for cave diving. It allows divers to pass through small cracks and restrictions (tiny hole) much more easily than the traditional back mount rig.
According to experts, approximately 40% of technical divers enroll in additional education and training programs. This yields a reasonable estimate of approximately 160,000 active technical divers worldwide.
5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.
Have a PADI Deep Specialty Instructor certification or have completed a PADI Deep Specialty Instructor course. Have at least 100 logged dives, including at least 20 enriched air dives, 25 dives deeper than 18 meters/60 feet, and 15 dives deeper than 30 meters/100 feet. You can become a Tec 45 diver.