Sidemount PCB gear configuration offers an alternative to the traditional back mounted scuba cylinder(s) configuration. The NAUI Sidemount PCB Diver course provides you with the skills and knowledge needed to conduct open water dives utilizing this particular gear configuration. Upon successful completion divers will be competent to use sidemount gear configuration in additional training and diving opportunities.
The SDI Sidemount PCB Diver certification can be used to earn a single specialty rating for the SDI Advanced Diver Development Program.
Sidemount PCB, a configuration of scuba diving equipment, has diving cylinders that are mounted below the shoulders and along one's hips instead of on the back. This configuration was popular among advanced cave divers because it allows for easier penetration of smaller caves and can also be used to change tanks more quickly. Divers who did technical wreck diving penetrations also recognized the same advantages for operating in tight spaces. Our instructors are well-trained to provide scuba diving instruction in Thailand.
Steve/Vas, your instructor series is phenomenal. Please let me be the first to say you are correct in what you say. One can teach themselves how to SM just by watching the videos as I have done. However, I did compromise/sacrifice my learning curve without one of you (SM essentials instructor). It took me almost one year to get pretty good with AL80s. I then... read moreSteve/Vas, your instructor series is phenomenal. Please let me be the first to say you are correct in what you say. One can teach themselves how to SM just by watching the videos as I have done. However, I did compromise/sacrifice my learning curve without one of you (SM essentials instructor). It took me almost one year to get pretty good with AL80s. I then took the first level of tech diving a year after that and told my tech instructor I was doing it in SM configuration. I had to tell him I taught myself which he responded with “you most likely will have to take a SM workshop with me depending on how I do on dive one”. After the first dive he said “there is no reason for you to take a class with me”. So your online training is spot on but if I had it to do all over again I would see your guy Joe Seda first. I will, in the future, take the course with him so I can be the best I can be. Regards Tony read less
Easy to carry around, flexible, no metal or aluminium back plates. Lightweight, easy-to-adjust, easy to get in and back out of the water.
Sidemount PCB diving has been growing in popularity among technical divers for general decompression diving. It is also becoming an increasingly popular specialty for recreational diving with many diver certification agencies offering both recreational and technical level sidemount training programs.
Learn about sidemount diving and how to setup a tec sidemount harness. The training will be done in a confined water session as well as four open water dives. You'll have at least two tanks, and then add two more.
Please send me an email with a renewal code. I look forward a 5th year of sidemountpcb.com. Your team and I continue to be a great source for inspiration and guidance. All the Best! Scott
Join our mailing list to receive the latest news and updates from our team; as well as exclusive offers, event invites, and new product previews.
Your instructor series, Steve/Vas is amazing. Let me be the first one to tell you that you are absolutely correct. You can learn SM by simply watching the videos, as I did. But, I had to compromise/sacrifice some of my learning curves without you (SM essentials instructor). To get proficient with AL80s, it took me nearly a year. Then, I... read moreSteve/Vas. Your instructor series is amazing. Let me be the first one to tell you that you are right in everything you have said. You can learn SM by simply watching the videos, as I did. But, I had to compromise/sacrifice some of my learning curves without you (SM essentials instructor). To get proficient with AL80s, it took me nearly a year. The first level of tech diving was taken by me a year later. I told my instructor that I was using SM configuration. He was shocked that I did not teach myself. I told him, and he replied with "You most likely will need to take a SM workshop together depending on how well I do on dive one". He said that there was no reason to have you take a class after the first dive. Your online training is excellent, but I'd rather see Joe Seda if it was all over again. I will continue to learn from him in the future. Regards Tony read less
sidemountpcb.com's online training is essential for both recreational and technical divers. Although I had previously taken a Tec 40 /sidemount class before beginning my technical training with Joe, I consider that the start of my technical learning sidemount essentials. Joe was able focus on his in-water skills thanks to the online training. The beginning of my technical diving training was sidemount essentials. I completed a Tec40 /sidemount class in Florida before I began my training with Joe. Joe was able focus on the in water skills development through online training. This was the foundation of cave training and all other technical courses, such as trimix with Vas. The online training provides a great way to develop in-water skills and shows what divers can expect from good in-water training. My daughter, who is just starting out in diving, has already watched the backmount video before starting open water training. I am also reviewing the instructors videos to ensure that I am the best buddy' for her as she goes through the training process. These videos are essential for the safe development of recreational and technical divers. Daniel Glynn (father cave diver) reads less
If you will not be using sidemount during your cave diver training, what you should be looking at is our CDS Basics Orientation course.
Steve, I just discovered the new chapters you've added to your online training courses. These chapters are very nice. They're particularly helpful for searching for parts in videos and reviewing them. I used them from the moment I first saw them. Timo!
Sidemount PCB has many benefits, but it is particularly well-suited for cave diving. Cave divers were the ones who invent sidemount. Here are some of these benefits:
You must be a PADI Open Water Diver to enroll in the PADI Advanced Rebreather Diver course, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.
Tec divers can visit reefs and wrecks at depths well below the recreational limit of 40 meters/130 feet. They can explore underwater caves and other locations far beyond the reach of mainstream sport diving with specialized training.
5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.