SidemountPCB is a type of scuba equipment that has diving tubes mounted on the sides of the diver. They are located below the shoulders and along their hips. It was first popularized by cave divers who can penetrate smaller sections of cave and can change tanks with greater ease. Divers who do technical wreck diving penetrations have also discovered the same benefits when operating in restricted spaces. We have qualified instructors who can teach scuba diver training in Thailand.
Although I have never attempted sidemount, after studying his online training I was certain that Steve is the right man to guide me and make sure I succeed. I was right! It was truly a life-changing week! I was beyond thrilled with the sidemountpcb Essentials program. Steve is an excellent teacher, has a lot patience, and... Read MoreI have never tried sidemount but I learned from his online video that Steve was the ideal man to teach and feel confident about it. I was correct! It was truly a life-changing week! Sidemount PCB Essentials exceeded my expectations. Steve is a great teacher. He is patient and gives his time and effort to all of his students. Every step is carefully planned. It was memorable and rewarding. Sidemount PCB Essentials Course has changed the way I dive. My diving skills and awareness were elevated in a way I didn't expect. Everything is in place: the harness, weight and position, the trim of the cylinder, and your overall balance in the water. This allows you to feel confident, relaxed and has no back pain. Although the course was quite challenging, it was extremely enjoyable. Every day began with a planning session, followed by a video review on our drills in the sea. Every time we got in the water, we had to drain our cylinders. That's why our learning curve was so steep! All of it was done with exceptional professionalism in a safe and relaxed atmosphere. Steve is a great instructor and I recommend this course. Steve will guide you to greatness if you are passionate about Sidemount PCB. read less
We are grateful for your hard work. It is an enormous help to everyone who wants to get into Sidemount PCB. Your online resource helped me to prepare for a cave sidemount crossover course in Mexico with Natalie Gibb.
Steve, just wanted to thank you for your incredible online Sidemount PCB course. I did my PADI Sidemount PCB training last year but always felt like my XDeep harness setup wasn't streamlined where I wanted it. The instructor was good, but I could tell he did not live and breathe sidemount. At the time I had signed up with your free course system which was helpful but... read moreSteve, just wanted to thank you for your incredible online Sidemount PCB course. I did my PADI Sidemount PCB training last year but always felt like my XDeep harness setup wasn't streamlined where I wanted it. The instructor was good, but I could tell he did not live and breathe sidemount. At the time I had signed up with your free course system which was helpful but obviously left you wanting more. I am doing my Overhead Environment training this November in Florida and wanted to make sure my skills and setup were up to speed. After watching your entire online course (WOW). I decided to rebuild my XDeep harness setup using all your recommendations. I re-did my entire bungee system, my attachment points, wing, etc... all using your setup. I finally feel my setup is where it needs to be, and I felt very comfortable in the water. So again, thank you. Next is working on all my skills which are much easier to work on now that my harness is setup correctly. Wish I spent the money on your training a year ago. Take care and please keep the updates coming. Thanks, Jason read less
This course will teach you about sidemount diving, and how to create a tec sidemount helmet. One confined water session, four open water sessions and hands-on training are included. You will start with two tanks and expand to at least two additional tanks.
Steve, just wanted thank you for your awesome online Sidemount PCB class. My PADI Sidemount training was completed last year. I still felt that the XDeep rig wasn't as streamlined and comfortable as I expected. While the instructor was competent, I could tell he didn't live sidemount. I had signed-up for your free course system, which was helpful at the time. However,... read moreSteve just wanted you to thank us for our amazing online Sidemount PCB Course. I had my PADI Sidemount training last year and felt that the XDeep system was not streamlined in the way I desired. The instructor was competent, but it was obvious that he didn’t live or breathe sidemount. I had signed up for the free course which was helpful, but it left me wanting more. I am completing my Overhead Environment Training in Florida this November. I wanted to make certain my setup and skills are up to the mark. I have completed your entire online course. I used all your suggestions to rebuild my XDeep sling harness. Your recommendations helped me redesign my entire harness system, including my attachment points. I feel confident in the water now that I know my setup is working properly. Once again, thank-you. Next is to continue working on my skills, which are much more manageable now that my harness works properly. I wish that I had paid for your training last year. Take care of yourself and keep the updates coming. Thanks, Jason read less
Steve, I just stumbled upon the new chapters that you have added to your online courses. They are great. They are especially useful when searching for a specific part of a video or reviewing them. They were easy to use and I started using them immediately after I saw them. Timo, a big thank you!
Not all certifications may be accepted by other dive training organizations. Ask your Tec Sidemount PCB instructor.
sidemountpcb.com online training is a critical component for all recreational and technical divers. I consider the start of my technical training sidemount essentials, which I did with Joe Seda in Florida, even though I had completed a Tec 40 / sidemount class prior to starting my training with Joe. The online training allowed Joe to focus on the in-water skills... read moreSidemount PCBing.com online training is a critical component for all recreational and technical divers. I consider the start of my technical training sidemount essentials, which I did with Joe Seda in Florida, even though I had completed a Tec 40 / sidemount class prior to starting my training with Joe. The online training allowed Joe to focus on the in-water skills development, which was the foundation for cave training and all other technical training including trimix with Vas Proud. The online training shows what all divers should expect from high quality in-water training, and it expedites in-water skill development. My daughter, who is just starting her journey into diving, has watched the backmount diving videos prior to starting open water training, and I am reviewing the instructors videos to make sure I'm the best 'buddy' I can be for her through her training process. I cannot stress enough the importance of these training tools in the safe development of recreational and technical divers. Daniel Glynn (father and cave diver) read less
Thanks so much to you Steve, and to Vas for your mentoring. Not asking questions and exploring options, tends to put a stop to the progression of safety and growth in diving. I have studied in depth your online teachings for 2 years now and counting. I have practiced and trained muscle memory but most importantly never kept my mouth shut if other divers ask... read moreThanks so much to you Steve, and to Vas for your mentoring. Not asking questions and exploring options, tends to put a stop to the progression of safety and growth in diving. I have studied in depth your online teachings for 2 years now and counting. I have practiced and trained muscle memory but most importantly never kept my mouth shut if other divers ask me. The results are incredible as they now see a better way. I must also say that in my 2 years of learning, you were always kind enough to explain, or give me an idea for improvement!!! There is always an opportunity to ask, learn, teach, discuss, and grow. In diving there should be no stupid questions. I’m sure I will open my mouth in future to ask another question!! Lol
One of the most important innovations in the equipment cave divers now use is the move from backmounted to sidemount doubles. While a large number of cave divers now sidemount their equipment, it is possible that there are many more open-circuit sidemount cavers than backmount.
Grab the PADI Sidemount PB Diver and Tec Sidemount PB Diver Manual at your local PADI Dive Shop, and get started immediately. If you are a recreational diver, you can focus on Chapters Two to Three. Otherwise, you can go through the entire manual.
Blue Label Diving is pleased to offer all levels of Sidemount PCB Diving Courses from SSI, TDI and PADI in Phuket Thailand. From recreational two tank side mount diving to advanced technical sidemounting in overhead environments and even instructor levels. The only drawback is that once you dive side mount, you may never want to return to backmount diving!
We provide courses for Recreational, Technical, Sidemount PCB, Overhead / Cave, Advanced Wreck, and Professional Development through the following agencies: SSI, SDI, TDI, ERDI, PFI, RAID.
What exactly is the Tec 40 Course? Your first step into technical diving is the PADI Tec 40 course. It is a fundamental level of decompression diving that allows you to dive with gas redundancy, higher Enriched Air mixes of up to 50%, decompression on EANX 50% for conservatism, and up to 10 minutes of decompression.
2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).
A typical diver, at a typical depth, with a typical tank
Based on personal experience, an average open-water certified diver on a 40-foot dive with a standard aluminum 80-cubic-foot tank will be able to stay down for 45 to 60 minutes before surfacing with a safe reserve of air still in the tank.