Technical Sidemount Scuba Dive Training Guide

What happens if you don't decompress after diving

Sidemountpcb.com online training has become a vital component for technical and recreational divers. Even though I had already completed a Tec 40 / Sidemount class before I started my technical training, I consider it sidemount essentials. Joe could focus on in-water skills with the online training. Read moreSidemountPCBing.com online training has been a crucial component for technical and recreational divers. Even though I had already completed a Tec 40 / Sidemount class before I started my technical training, I considered the beginning of my technical training sidemount basics. Joe Seda was my instructor in Florida. Joe was able to concentrate on in-water skills, which were the foundation for all technical training, including trimix with Vas. Online training demonstrates what every diver should expect from top-quality in-water training and expedites in-water skills development. My daughter is just beginning her dive journey. She has seen the backmount videos and I am now reviewing the instructor videos to ensure I am the best 'buddy" for her throughout her training. These training tools are crucial in the safe development and safety of technical and recreational divers. Daniel Glynn (father, cave diver) read more

It was amazing to have such a positive experience with your online class. In my scuba 'career,' I had very few interactions with other instructors, but I can tell you that I have never experienced such useful, deep and practical explanations about how I can become a better scuba diver. When I completed my PADI AOOW training, buoyancy control was a problem as I attempted to capture my SMB ..... Read more I am so grateful for your informative online course. In my scuba 'career, I had very few interactions with other instructors, but I can tell you that I have never seen so many practical and helpful explanations about how to become an even better diver. I struggled with buoyancy control when I attempted my SMB while I was doing my PADI OOW training. I asked my instructor how to improve buoyancy. He told me to just practice. He assured me that he had good buoyancy controls, but he didn't explain the importance proper weighting or breath control to me. Your videos were a real eye opener. Not to mention the fact that my sidemount diving buddy did not understand why I wanted it. Even now, highly recommended instructors often ask me why sm is important. What's the purpose of it? It's a common practice for cave divers. I am happy I chose sm. It is a completely different world. No one ever taught me or inspected my SM. However, when I dive with others they often comment on how well my trim is. I learned everything from your videos. You showed me how to set up equipment, get in and out of water, solve problems, and so on. I hope to meet you and to have a training with you. Because I want to make scuba diving better and to help others become more skilled divers. Although I know that there are many talented divers and instructors, I think your contribution to the diving community is very significant. Thank you! Regards, Csaba read less

Blue Label Diving in Phuket Thailand offers Sidemount PCB Diving Courses at all levels. From sidemount diving in recreational tanks to sidemounting in overhead conditions, and even instructor training. Sidemount diving is not for everyone.

I am grateful for your wonderful work. It has been a tremendous help for anyone interested in Sidemount PCB. Your online resource was invaluable in preparing me for the cave sidemount cross-over course I took with Natalie Gibb in Mexico.

Technical Divers

Sidemount diving is allowed after successful completion of the course. This is subject to the following restrictions:

The major change in equipment cave divers use since the beginning of this century has been to switch from using backmounted doubles to sidemount. Many cave divers now sidemount. There may even be more sidemount sidemount cave divers that backmount cave divers.

Technical Sidemount Scuba Dive Training Guide
Technical Divers
Big Blue Tech

Big Blue Tech

Computer-aided instruction is an integral aspect of nearly all courses we teach. Why? The answer is simple: eLearning makes it easier for students to get in the water quicker and spend more time in the water. That's why we offer all applicable eLearning courses -- which are usually worth $140 -- at no additional charge. This means that you will get an additional day of training in the water. How valuable is that? Priceless.

The NAUI Helitrox Diver course provides the training and experience necessary to understand the hazards of utilizing helium-enriched EANx for dives to depths not exceeding 150 fsw (46 msw) that may require staged-decompression, utilizing EANx mixtures and/or oxygen during decompression. Graduates will be competent plan and execute extended range dives requiring staged-decompression utilizing Helitrox and oxygen.

How long can a diver stay at 60 feet

International Training is the parent company of Technical Diving International. Both courses have a lot in common. Both courses use identical learning materials (which we also wrote). So, what is the difference?

I've never tried sidemounting before but I learned a lot from his online training and I was confident in my abilities. I was correct! It was truly a life changing week! The sidemountpcb essentials course far exceeded my expectations. Steve is a great teacher with a lot of patience. I was not wrong! It was truly a life changing week! Sidemount PCB Essentials far exceeded my expectations. Steve is a great teacher. His patience is amazing and he puts in a lot time and effort with his students. Every aspect of the lesson is well planned and executed with great care. It was both memorable and rewarding. Sidemount PCB Essentials Course was a transformative experience for me. In such a short time, I was able to increase my awareness and improve my skills below water. Everything is in its right place, from the harness set-up, to the weight and position of the swimmers, to the cylinder trim and to your balance in the water. You feel more confident, relaxed, and have a true sidemount setup. This course was both challenging and very enjoyable. Each day starts with a planning and theoretical session. We end with a video review about what we did in the water. This is where all details are discussed. It was a tedious process to drain the cylinders before we could go into the water. This is why our learning curve has been so steep. Everything was handled in a calm and secure environment, yet with remarkable professionalism. Steve's course is worth it. Steve will assist you in achieving more than you could ever imagine if Sidemount PCB is your passion. read less

Master Course
Master Course

Sidemount PCB is a configuration that allows you to scuba dive with cylinders attached along the side of the diver. Instead of being on the back, the cylinders are placed below the shoulders and along your hips. Because smaller sections of cave are possible to penetrate, and tanks can be easily changed, it was initially popular with cave divers. Technical wreck diving divers also saw the benefits of operating in small spaces. Thai instructors are highly qualified to instruct scuba diving classes and scuba dive training.

Technical diving is not the same as regular diving. Tech divers usually have multiple tanks. SidemountPCB is becoming a more popular method to configure multiple cylinders when technical diving. You can learn how to tec dive with the Tec Sidemount PCB Diver Course and then transfer your knowledge to other TecRec courses. The instructor might offer to incorporate this course into the Tec 40, Tec 45, or Tec 50 courses.

Technical Sidemount Scuba Dive Training Zone

Steve, we are grateful for your support and guidance. Do not hesitate to ask questions and to explore all possibilities. It can make it difficult to progress in safety and increase your diving skills. I have been studying the online lessons for 2 years. I have practiced and honed my muscle memory, but the most important thing is that I never kept my mouth closed when others ask me questions... Read moreThanks Steve for all of your help and Vas. Doing so can hinder your safety and growth. I have been following your online instruction for over two years. I have practiced and trained my muscle memory, but I also never kept my mouth shut when other divers ask. Amazing results as they now see a better path. You were also kind enough to give me suggestions or explanations during my 2 year learning experience. There is always an opportunity for you to ask, teach and discuss. There shouldn't be stupid questions in diving. I'm sure that I will be able to ask another question in the future. Lol

If you've looked into technical diving, you realize that tec divers always wear more than one tank. Sidemount PCB is an increasingly popular way to configure multiple cylinders for technical diving. You can enter the world of tec diving with the Tec Sidemount PCB Diver course and apply what you learn to other TecRec courses. Your instructor may offer to integrate this course with the Tec 40, Tec 45 or Tec 50 courses.

Check our other pages :

Frequently Asked Questions

What exactly is the Tec 40 Course? Your first step into technical diving is the PADI Tec 40 course. It is a fundamental level of decompression diving that allows you to dive with gas redundancy, higher Enriched Air mixes of up to 50%, decompression on EANX 50% for conservatism, and up to 10 minutes of decompression.

2-3 hours

Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).

A typical diver, at a typical depth, with a typical tank

Based on personal experience, an average open-water certified diver on a 40-foot dive with a standard aluminum 80-cubic-foot tank will be able to stay down for 45 to 60 minutes before surfacing with a safe reserve of air still in the tank.