We can offer the SDI course if requested. However, we only offer the TDI course by default. This can be taken as a stand-alone program, but our students usually combine it with the Apprentice Cave Diver course.
Sidemount PCB refers to scuba divers who have their diving cylinders placed along the diver's side, below the shoulders, and along the hips. As smaller cave sections can be penetrated, the tanks can be changed more easily. This was originally a popular configuration for cave divers. Diving professionals who perform technical wreck diving penetrations recognized the same benefits. To teach scuba divers in Thailand, we have highly-trained instructors.
Certification cards: We issue these only when earned. Simply taking part in a course does not guarantee certification. For cave courses, certification cards from multiple training agencies may be available. C-cards generally cost around $30 each, depending on agency. Your instructor can tell you more.
222 Commercial Boulevard, STE #106, Lauderdale-By-The-Sea, FL 33308Phone: (754) 800-4635 Email: info@getaqui.com
Sidemount has never been something I tried before. However, from watching his online video training, it became clear that Steve was the ideal man to show me how and give me confidence about sidemount. It was an amazing experience, and I didn't regret it! It was truly life-altering! Sidemountpcb Essentials exceeded my expectations. Steve is a great teacher, has patience, and... I was absolutely right! It was truly life-changing! Sidemount PCB Essentials was beyond my expectations. Steve is an excellent teacher. He's patient, hardworking and puts in a lot to every lesson he gives. Everything is planned and done with great attention to detail. It was an unforgettable and enjoyable experience. Sidemount PCB Essentials Course completely transformed my diving. In such a short amount of time, my awareness level and skills were higher than I could have ever imagined. Everything is in place, including the harness setup, the weight amount, position, the cylinder trim, as well as your balance in and out of water. This will make you feel calm, confident, and allow you to experience sidemount setups that are truly comfortable. The course was difficult but enjoyable. Every day started with a planning session. Each day ends with a video review and discussion about the drills we performed in the water. The learning curve is high because we had a tendency to drain our cylinders whenever we were in the water. Everything was done in a relaxed atmosphere, with great professionalism. Steve will make this course easy for you. Steve will help to make you a better diver! read less
I want to thank you for all your help. Your online resource made it possible for me to take a sidemount cave course with Natalie Gibb, Mexico.
Sidemount PCB Diving was developed in the early days of cave diving. It was pioneered in this way by Lamar Hires, who used multiple tanks in a compact and streamlined manner to reach places back mounted divers couldn't. The technique has grown to be one of the most popular in our sport.
The goal of this course is to teach you the basics of how to use the equipment in your cave or tech diver training. You will also need the same equipment for the course. This includes:
Graduates may take part in sidemount diving activities after completing this course. However, they must adhere to the following restrictions:
The course will require the same equipment, as you will need it for your technical diving and cave training. This includes:
We strive for perfection to make your experience with AQUI a long-lasting positive memory. From the freshly ground coffee & tea selection, to the custom attention we devote to every person, you’re in great care!
Sidemount PCB Harness: This is a specialised Harness, like a BCD, which is very minimum and light weight. This harness has several D-rings on shoulder straps, and a special Butt plate with rings or sliders.
Steve/Vas, Your instructor series has been amazing. Please allow me to be the first person to state that I agree with everything you said. One can learn SM simply by watching the videos. I was able to sacrifice my learning without the help of SM Essentials Instructor. It took me nearly one year to get good at AL80s. I then read moreSteve/Vas. The instructor series you have created is truly amazing. Let me just say that I agree with everything you have to say. As I have shown, anyone can learn SM from watching videos. I was able to sacrifice my learning curve, but not without the help of SM essentials instructor. It took me almost one full year to get used to AL80s. I completed the tech dive level one year later and informed my tech instructor that I was diving in SM configuration. I had to explain to him that I taught it myself. His response was "you most likely need to take a SM class with me depending upon how I do on dive 1". After my first dive he said, "There is no reason why you should take a class alongside me." Your online training is perfect, but I would go back to Joe Seda if I had to. I plan to continue the course with him in the future. Regards Tony read less
Just wanted to let you know that your online training program is outstanding. Each time I log in, I learn something. You go above and beyond in engaging with your subscribers, which only enhances the incredible value you provide. Thank you so much for taking the time to read this.
You must be a PADI Open Water Diver to enroll in the PADI Advanced Rebreather Diver course, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.
Tec divers can visit reefs and wrecks at depths well below the recreational limit of 40 meters/130 feet. They can explore underwater caves and other locations far beyond the reach of mainstream sport diving with specialized training.
5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.